Post Created date
Protocol suggestions
If you can't monitor the transmission to detect a collision... Watch the line for another transmission before starting. Make sure you have good error detection in your receiver...
Saturday, 22 October 2005 - 02:46
AVR Studio 4
I can't tell you how often I've programmed the wrong hex file into an AVR :oops:
Friday, 21 October 2005 - 22:35
regarding c and assembly coding for avr
Quote:This is a religious topic and the assembler guys are all going to Hell. I represent that remark :twisted:
Friday, 21 October 2005 - 22:31
Is the ATtiny13's operating current *that* low?
You can trust the datasheet's info.
Friday, 21 October 2005 - 22:29
Communication over power line (12V-DC)
The power supply is on the transmitting or on the receiving end of the 20 meter cable? How much current do you expect the line to carry to power the remote device?
Friday, 21 October 2005 - 22:23
FORTH for the new AVRmegas?
As an experiment once, I wrote a CP/M bios in polyforth. Worked slick and took up little ram.
Friday, 21 October 2005 - 22:11
How to use a pushbutton instead of a switch to source power
Could be exciting in an airport :shock:
Thursday, 20 October 2005 - 23:57
Sensor
Must be a class project or something. IR seems the most reasonable way to detect a human to me, but I haven't tried it.
Thursday, 20 October 2005 - 23:53
FORTH for the new AVRmegas?
Quote:Are you saying that FORTH is the Islam of programmers? Now, you could have talked all day and not said something like that :P Half the department used and liked FORTH. The...
Thursday, 20 October 2005 - 23:47
Thoroughly confused about i/o
Ummm You're getting confused 'cause of your vocabulary.
Thursday, 20 October 2005 - 13:38
FORTH for the new AVRmegas?
Hmm. Used to do forth on 8080s. Probably wouldn't be hard on an AVR. I about got kicked out of AI class when I commented, "Oh, just like in Forth," on some LISP feature :roll:
Thursday, 20 October 2005 - 13:33
Thoroughly confused about i/o
Ok.... To make a pin an output, set its bit to 1 in the DDR register. It will follow what you write to the PORT register. If you read from the PORT register, you will see what you...
Wednesday, 19 October 2005 - 22:11

Pages