Post Created date
Narcoleptic Debugging
Last Week I started to see the same thing: OCDEN Flag not sticking, being cleared when entering/leaving devug mode. I asked for technical support at I finally got...
Wednesday, 29 July 2009 - 14:21
Narcoleptic Debugging
Checking the supply voltage(s) is all always a good idea as one cannot expect a part to operate correctly when out of spec. in fact, it should be one of the first things to check...
Friday, 3 July 2009 - 15:05
Narcoleptic Debugging
After you check the OCDEN box and press program do you verify the fuse settings by reading them back again right away? In my situation I couldn't get the OCDEN fuse to stick...
Thursday, 2 July 2009 - 19:12
Narcoleptic Debugging
Thats unfortunate. Perhaps you should elevate this issue up to Atmel's technical support service? I'm not familiar with the Dragon platform. Does it support ISP as well as JTAG?...
Thursday, 2 July 2009 - 19:09
Narcoleptic Debugging
I thought I would update this thread in case someone else trips over this one and could use some help. Ultimately, the solution to my problem turned out to be related to the OCDEN...
Thursday, 2 July 2009 - 14:36
Narcoleptic Debugging
UNiXWHoRe wrote:If you have just an infinite loop with a NOP, your compiler will optimize it, probably putting it to sleep. Thats an interesting thought... I cheked, the NOP is...
Tuesday, 26 May 2009 - 16:27
Narcoleptic Debugging
Swapping out the target platform was one of the first things I tried, but thanks for the thought. DFR
Tuesday, 26 May 2009 - 13:24
Terminal Window?
Yes, thats what I had, but its gone south on me. DFR
Tuesday, 14 April 2009 - 18:03
Terminal Window?
I'm not using simulation, but a JTAG ICE MKII. So, I assume HapSim Wouldn't work for me then. Thanks Cliff DFR
Tuesday, 14 April 2009 - 16:40
Terminal Window?
Thanks for that Clawson. Just what I needed, a clear and concise answer to this question. I will try to find an install for AVR Studio V3.xx and put it on a laptop and see what I...
Tuesday, 14 April 2009 - 16:21
Help me .....TWI error
Sounds to me like you've got the key elements making up your problem here. No ISR means no acceptance of data and no ack. If you are having problems tracking the conversation...
Friday, 20 March 2009 - 13:45
How to breakpoint from sourcecode
Oopa... Forgot to mention that the break instruction doesn't work on all avrs. I'm using an ATM2560. To see if your specific processor can use this techniqueue please consult the...
Friday, 13 March 2009 - 15:10