Type in the full discussion title or a part of it.
Discussion Title Created date
ISP production programming without VCC connected
HI ALL I am using an AVRISP MKII to ISP program a ATmega162-based product here and am having a problem. I'm sure the cause is located somewhere between the seat and the keyboard....
Thursday, 12 October 2006 - 18:36
AVR Studio Runtime error - I'm stalled
AVR Studio 4.12.498 Service Pack 4 GUI Version 4, 12, 0, 491 When I try to load a COF file generated by ICCAVR Advanced V7.05 into AVRStudio I get a windows error...
Thursday, 5 October 2006 - 18:32
QFP100 to Through Hole Adapter?
Does anyone kmow of a reasonably priced adapter that takes a 100 pin QFP package and allows it to be connected to a through-hole PCB? I see a variety of manufacturers of such...
Thursday, 22 June 2006 - 16:39
SD Card QUestions
We are working with a purchased IP FAT16 file sytstem for SD Card in SPI mode and have encountered a problem. The FS initializes the card by writting a CMD0 and then polling the...
Tuesday, 16 May 2006 - 15:33
LCD Displays: standard sizes?
I am trying to find an LCD display with integrate controller based on the cutout dimensions of th case i want to put it in. ARE ther standardized sizes I can go on? The case has...
Friday, 24 March 2006 - 14:14
RTOS for M2560
We've been looking around at the various RTOS IP vendors for something that will work out of the box for the M2560 using ICCAVR V7. Only one, uC-OS II, caims to work without...
Thursday, 9 March 2006 - 17:15
STK500/503 Schematics
We've received our STK500/503 board pair. Now looking for schematics. I've looked around but haven't found them. DFR
Monday, 6 March 2006 - 18:57
ATMega2560 Development Board
We are looking for a development board with a M2560 AVR and 4 RS232C DB9 connectors. I've done a quick search and have not found anything. Is one available? DFR
Thursday, 2 March 2006 - 17:14
Bootloader for M2560
Well Atmel sayd that the ATMEGA2560 is in production with an 8 week leadtime, so we are taking the plunge and converting my dual M128 design over to the M2560. We are buying some...
Monday, 20 February 2006 - 21:06
"On Chip Debug Register" OCDR Use and AVRStudio
I've been trying to find out what happened to this feature. I'd like to use the OCDR register to output diagnostic info to AVRStudio from my firmware for development. Does anyone...
Friday, 3 February 2006 - 19:13
4-UART Solution + RTC
Moving on to the next product... It needs 4 UARTS and the only MEGA AVRs that have 4 are not currently available from Digikey, so... I am thinking about using the M162 again as a...
Thursday, 19 January 2006 - 17:52
Not sure if I should be concerned or not. OCDEN Fuse Bit
I've stumbled upon an issue, but I don't know if I should be concerned about it or not. We have stuffed a product with an assortment of ATMEGA162 and ATMEGA162V parts. I'm not...
Monday, 16 January 2006 - 22:02

Pages