Type in the full discussion title or a part of it.
Discussion Title Created date
ATmega328P Xplained Erasing device failed
Hi All,   I have been using my ATmega328P Xplained with the mEDBG programmer/ debugger.  However after my first debug session, when I now try to program an error is...
Monday, 6 July 2015 - 19:23
Amtel Studio 6 Erasing Device Failed
Hi All,   I have been using my ATmega328P Xplained with the mEDBG programmer/ debugger.  However after my first debug session, when I now try to program an error is...
Monday, 6 July 2015 - 15:55
UART RS232 Character Constant too long
Morning,   I have an odd problem.  I can write 0x00 - 0x08 to hyperterminal, but after 0x09 and upwards I get smiley faces etc being displayed.     The...
Monday, 6 July 2015 - 07:25
Bit Shifting
Hi, I need a bit of advice if my bit masking methods are correct. I have a 16 bit start_address and I only require the top 8 bits. I then want to put this data in an 8 bit char (...
Sunday, 5 July 2015 - 15:39
ATmega 328P SPI setup confirmation
Hi all,   Can I just confirm the below code does what i think does.  The top code sends data from the master to the slave sensor.  The second piece of code has an...
Saturday, 4 July 2015 - 16:52
error: undefined reference to function call
Hi all, I am having a few header problems. When I declare setup(); in main.c, the functions in main.c cannot see the header files in .h file. These are the errors I am getting...
Saturday, 4 July 2015 - 13:51
First ATmega328P Explained Rs232 Example not Working
Hi All,   I am working through my first Rs232 example and I cannot get it working.  I have tried my max232 breakout board on another project and it works OK.  I...
Thursday, 2 July 2015 - 10:34
ATmega328 Multiple SPI pins
Hi all,   Is it possible to configure general I/O pins as an SPI.   I have a project that I will be using the ATmega328 as a slave device reading 5 SPI sensors using...
Wednesday, 1 July 2015 - 07:58
ATmega328P Xplained Code Examples
Hi all,   I am just moving over from another chip vendor, and I am a complete newbie to AVR.   I have just started up my ATmega328P Xplained and I am looking for...
Thursday, 18 June 2015 - 09:25

Pages