SOLVED: migration from AS4 to AS6; build failure on poisoned Thank you! Thank you! Thank you!
My search for "SIG_INTERRUPT1" in iom8.h stopped after the #define reference. I did not search further to see your discovery at the end of iom8.h.
Friday, 11 January 2013 - 19:31
SOLVED: migration from AS4 to AS6; build failure on poisoned My frustration with this problem is driven by the fact that SIG_INTERRUPT1 is #define in iom8.h, which is the device specific header file for the atmega8.
/* External Interrupt...
Receiving SMS from GSM modem using Atmega16 I would set the GSM modem to text mode for SMS messages. Avoids having to do the algorithm necessary to decode the binary SMS message.
Saturday, 16 April 2011 - 18:55
PID controller implementation using ATmega 16 Kartman wrote:Note: the above code has some defects regarding atomicity in the least.
No doubt. I am sure it has some molecularity problems as well. :P
Friday, 29 October 2010 - 03:02
PID controller implementation using ATmega 16 Here is code for the PID controller for my smoker. Drives a dual color LED display for setpoint temperature and current temperature. Reads a thermistor and uses a look-up table...
Wednesday, 20 October 2010 - 02:53
For 5V, is a 6.3V capacitor enough? 6.3 volts over 5 is a 25% working voltage margin. That is plenty. As someone else posted, rated specs should be met at working voltage.
Monday, 9 August 2010 - 03:41
Reliable source for Sandisk SD cards in moderate quantity I never considered SanDisk "cheaper." The local Costco store here in California has consistently carried SanDisk product. Of course, that could always change, as what appears...
12 volt input sigal to atmel pin to make logic high Actually, you can go to application note AVR182 and witness how they put 240 volts on to a pin. As js observed and others have noted, it is about limiting current and exploiting...
Friday, 27 February 2009 - 04:05
circuit to turn on IED at 38K As noted, the term IED is generally used to refer to improvised explosive devices. I assume you really mean infrared (IR) LEDs, and would usually just be called LEDs regardless of...
Thank you! Thank you! Thank you! My search for "SIG_INTERRUPT1" in iom8.h stopped after the #define reference. I did not search further to see your discovery at the end of iom8.h.
My frustration with this problem is driven by the fact that SIG_INTERRUPT1 is #define in iom8.h, which is the device specific header file for the atmega8. /* External Interrupt...
Thanks for the suggestions. I will try those this evening.
Why torture yourself decoding the PDU format? Set the SIM300 to text mode for SMS messages.
I would set the GSM modem to text mode for SMS messages. Avoids having to do the algorithm necessary to decode the binary SMS message.
Kartman wrote:Note: the above code has some defects regarding atomicity in the least. No doubt. I am sure it has some molecularity problems as well. :P
Here is code for the PID controller for my smoker. Drives a dual color LED display for setpoint temperature and current temperature. Reads a thermistor and uses a look-up table...
6.3 volts over 5 is a 25% working voltage margin. That is plenty. As someone else posted, rated specs should be met at working voltage.
I never considered SanDisk "cheaper." The local Costco store here in California has consistently carried SanDisk product. Of course, that could always change, as what appears...
Costco on-line has SanDisk 2 GB four pack for 21.99. http://www.costco.com/Browse/Pro...
Actually, you can go to application note AVR182 and witness how they put 240 volts on to a pin. As js observed and others have noted, it is about limiting current and exploiting...
As noted, the term IED is generally used to refer to improvised explosive devices. I assume you really mean infrared (IR) LEDs, and would usually just be called LEDs regardless of...
Pages