WARNING to Potential ButterFly Purchasers Ok,Ok all this talk about how much it costs to populate the board...well I did the math. When I ordered from digi-key I bought 4 35pin header that were $.94USD each.(lets just...
Monday, 27 February 2006 - 18:58
Mein STK500!! I just have a story to tell.....probably one of the dumbest things I've ever done. I tried programming my mega103 and *nothing*would work! Fuses would read wrong, every thing was...
Friday, 24 February 2006 - 05:36
AtTiny15 High Voltage Serial Programming The OP wants to use the RESET as an I/O. This will disable ISP so that is why he wants to use High Voltage programming.
Thursday, 23 February 2006 - 00:52
Questions about AVR Butterfly USI can be used for a multitued of things. It can be used as an SPI,I2C and a couple other busses that I can't remember.
How to program AVR? STK500 or AVRISPmk II. The STK is $80 and the AVRISp is $34. The STK500 is a complete development board. It has sockets for all DIP AVRs and both can do ISP which is what you will...
Sunday, 19 February 2006 - 23:46
New entry for USB connectivity from Maxim? I have 2 samples in my hand.....Got to make an adapter board and try these out!! Though, I like the new USB AVRs better...no extra ICs and almost the same price as the Maxim,...
Saturday, 18 February 2006 - 04:32
USB-unusable secret bus There is a new line of AVR micros available! They have USB capabilities and some even have OTG (On-The-Go, USB Host/device) in which you should be able to comunicate with your USB...
Wednesday, 15 February 2006 - 23:06
Where to get a STK525! Seems like the USB Key is in my price range. :D These are some pretty cool devices, no programmer required....you download using some built-in USB bootloader. Hope GCC ads support...
Wednesday, 15 February 2006 - 03:10
Where to get a STK525! They will, eventually. If they have a good supply then DigiKey will *probably* get them within 1-2 months. BTW, Do you know how they are $$?
Ok,Ok all this talk about how much it costs to populate the board...well I did the math. When I ordered from digi-key I bought 4 35pin header that were $.94USD each.(lets just...
I just have a story to tell.....probably one of the dumbest things I've ever done. I tried programming my mega103 and *nothing*would work! Fuses would read wrong, every thing was...
The OP wants to use the RESET as an I/O. This will disable ISP so that is why he wants to use High Voltage programming.
USI can be used for a multitued of things. It can be used as an SPI,I2C and a couple other busses that I can't remember.
I used the GCC port of the bootloader from: http://www.siwawi.arubi.uni-kl.d... with the time stamp of 20040127
I installed an older revision of the bootloader and don't have the problem anymore...even with the battery.
STK500 or AVRISPmk II. The STK is $80 and the AVRISp is $34. The STK500 is a complete development board. It has sockets for all DIP AVRs and both can do ISP which is what you will...
I have 2 samples in my hand.....Got to make an adapter board and try these out!! Though, I like the new USB AVRs better...no extra ICs and almost the same price as the Maxim,...
There is a new line of AVR micros available! They have USB capabilities and some even have OTG (On-The-Go, USB Host/device) in which you should be able to comunicate with your USB...
Seems like the USB Key is in my price range. :D These are some pretty cool devices, no programmer required....you download using some built-in USB bootloader. Hope GCC ads support...
They will, eventually. If they have a good supply then DigiKey will *probably* get them within 1-2 months. BTW, Do you know how they are $$?
IT'S OUT!!!!!! On ATmels site!!! :D
Pages