Post Created date
ICE to program other AMRs?
Whoops, the OpenOCD manual has the following statement on the ICE Atmel SAM-ICE (Only works with Atmel chips!)   But I guess I can give it a try anyway, since I got the stuff...
Wednesday, 19 August 2020 - 23:25
ICE to program other AMRs?
Thanks, sounds promising then. I'll try OpenOCD. I was thinking about AVRDude, but that seems to require Atmel chips.  
Wednesday, 19 August 2020 - 23:11
LonTalk Protocol
HI   I do realize this is an old thread. Nevertheless, I am curious if there are any updates on this topic. Did anyone implement anything using an AVR? Thanks
Tuesday, 8 October 2019 - 17:55
How to drive a PWM pin high?
What do you recommend instead?
Monday, 12 September 2016 - 20:45
How do I get this line of code to work?
 Oh, that was just a typ-o that I now see slipped in here too ;)    
Monday, 12 September 2016 - 10:53
How do I get this line of code to work?
netizen wrote:   Wrong yet again: pwm_cfg is not a pointer thus you can't use the -> operator.   Aha, so that's the difference in using -> versus .  as in...
Monday, 12 September 2016 - 10:22
How do I get this line of code to work?
thomasx wrote: Figured it out :)   This is what it should look like, of course :)   ((TC0_t *)pwm_cfg.tc)->CTRLC = ((TC0_t *)pwm_cfg.tc)->CTRLC || 1;   And it...
Monday, 12 September 2016 - 10:13
How do I get this line of code to work?
netizen wrote:   It also raises a compiler warning because you should cast it to TC0_t*, as mentioned earlier. :-) I agree that it should, but it actually doesn't. I guess...
Monday, 12 September 2016 - 10:12
How do I get this line of code to work?
Figured it out :)   This is what it should look like, of course :)   ((TC0_t *)pwm_cfg.tc)->CTRLC = ((TC0_t *)pwm_cfg.tc)->CTRLC || 1;   And it works. Thanks...
Monday, 12 September 2016 - 10:10
How do I get this line of code to work?
STOP STOP STOP! I just noticed I had missed to comment out one important code line.   This does NOT! work temp = &pwm_cfg.tc;  This DOES work temp = pwm_cfg.tc;My...
Monday, 12 September 2016 - 09:49
How do I get this line of code to work?
netizen wrote: thomasx wrote: Alternative 1 works fine.   How do you check for that? Well, I know it works,  becuase I can see the resulting signal changing state on...
Monday, 12 September 2016 - 09:42
How to drive a PWM pin high?
It worked!   But it was a mess accessing the CTRLC register through the ASF code. Well well, it works :)
Monday, 12 September 2016 - 00:16

Pages