Type in the full discussion title or a part of it.
Discussion Title Created date
Re:Light Dimmer circuit ..Lamp flickers at higher firing angles(for period 4ms to 10ms)
Dear freaks As i am working with light dimmer circuit intrfaced to attiny 45.Using an external interrupt for zcd and delay through one of the GPIO.As per the observation light is...
Monday, 30 May 2016 - 11:45
Re:Trying to implement zero cross detector on attiny2313 load 230v AC
 Hi   I am working on Trying to implement zero cross detector on attiny2313  load 230v AC,i am using attiny2313 INT0 PIN for external interrupt,and D0 for signal.I...
Friday, 11 September 2015 - 06:59
How to display the sequence (10,15,20,25,30....60) on dual dice seven segment display
Hi        How to display the sequence (10,15,20,25,30....60) on dual dice seven segment display.Their are 2 Keys when Key1 Pressed  for first time 10...
Tuesday, 14 April 2015 - 13:16
unable to produce exact 1sec using timer1 on atmega88PA
Hi i am trying to configure timer1 for exact sec when i use this code i am getting less than a sec .(910 millisec).Kindly guide me how can i configure for exact 1sec. #ifndef...
Friday, 10 April 2015 - 06:33
Re:How to implement 20 mins on of relay with timer and how to implent start/pause with the same timings
Hi,I am using ATMEGA88PA i need to configure timer for 20 mins (Relay will be on for 20 mins time)kindly guide me how to implement,for example in this 20 mins timing if i press...
Sunday, 5 April 2015 - 09:48
Re:How to test code in simulator for atmega88PA
Hi,I am working on ATmega88PA controller new to atmel Family,i have written the code for 7segment display if i press key1 count has to increased(0,1,2,3,4,5,6,7,8,9) and...
Friday, 3 April 2015 - 06:05
Re:how to find count for 1sec and 59mins and 59 sec's for fast PWM for attiny45
Hi,   I am new to this contorller ,can any one suggest me how to find the exact count for 1sec and 59mins and 59 sec's for  fast PWM for attiny45.i would like to...
Monday, 23 March 2015 - 04:53
Re:not finding C file for GCC C Executable Project
Hi ,   I am working on Atmel studio 6.2  when i select C/C++ , GCC C Executable Project ,then after selecting the device (ATTINY48) in Atmel studio page at solution...
Thursday, 26 February 2015 - 06:28