Post Created date
Best config prescaller and etc. for ADC in Tiny, need solution
In datasheet Tiny45 wrote \>>   Table 17-3. Voltage Reference Selections for ADC Internal 2.56V Voltage Reference without external bypass capacitor, disconnected from...
Friday, 13 February 2015 - 18:39
Best config prescaller and etc. for ADC in Tiny, need solution
while (ADCSRA & (1 << ADSC)); // Wait for it to finish while ((ADCSRA & (1 << ADIF))== 0...
Friday, 13 February 2015 - 18:33
Best config prescaller and etc. for ADC in Tiny, need solution
Where high frequency prescaler operates on exactly ADC conversion? You should always choose the highest possible frequency presсaler for free-run adc?
Friday, 13 February 2015 - 18:10
assignment makes pointer from integer without a cast WARNING
my code work ok, real write to internal eeprom, but compiler indicatet warning allways releace built without error debug build with error sometime   tollchain compiler...
Friday, 13 February 2015 - 10:20
assignment makes pointer from integer without a cast WARNING
ERROR passing argument 1 of '__eewr_word_tn45' makes pointer from integer without a cast unsigned int  volt        = {0}; int mems = {16};...
Thursday, 12 February 2015 - 12:49
AVRISP mkII problem with Tiny10
snigelen wrote: I mean, if everything is connected: 1. Disconnect everything that can't handle 12 V from the reset pin on the tiny10 (including reset from the programmer). Leave...
Thursday, 12 February 2015 - 10:51
Switch & Case in Atmel Studio C
    DDRB  &= (~((1<<DDB5) | (1<<DDB4) | (1<<DDB3)));     PORTB |=    (1<<PB5)  | (1<<PB4)...
Thursday, 12 February 2015 - 10:13
Switch & Case in Atmel Studio C
joeymorin wrote: Be careful.  If you disable the reset pin, you will no longer be able to program the part with ISP or with debugWire.  You will need a programmer...
Tuesday, 10 February 2015 - 20:18
AVRISP mkII Clone (MEGA8) Win7 users around?
Atmel Studio 6.2 sp1 1502 C:\Users\user\AppData\Roaming\Atmel\AtmelStudio\6.2\ApplicationStatus.log   13:06:26.216: Got Tool::contextAdded([{"ID":"Tool_1","Name":"com.atmel....
Tuesday, 10 February 2015 - 11:37
ISP MKII clone - how to add JTAG for DEBUG?
Atmel Studio 6.2 sp1 1502 C:\Users\user\AppData\Roaming\Atmel\AtmelStudio\6.2\ApplicationStatus.log   13:06:26.216: Got Tool::contextAdded([{"ID":"Tool_1","Name":"com.atmel....
Tuesday, 10 February 2015 - 11:29
AVR ISP mkII
Atmel Studio 6.2 sp1 1502 C:\Users\user\AppData\Roaming\Atmel\AtmelStudio\6.2\ApplicationStatus.log   13:06:26.216: Got Tool::contextAdded([{"ID":"Tool_1","Name":"com.atmel....
Tuesday, 10 February 2015 - 11:26
Switch & Case in Atmel Studio C
How to fix RESET and this fuse bits in Atmel Studio 6 Simulator?
Sunday, 8 February 2015 - 23:38

Pages