Post Created date
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
Download https://github.com/abcminiuser/l... ------------- C:\lufa-master\Projects\AVRISP-MKII\make MCU = at90usb162 ARCH = AVR8 BOARD = USBTINYMKII F_CPU...
Friday, 2 October 2015 - 07:59
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
Now its work! Just modify & compile last LUFA from github, and replace driver usb driver to libusb-win32 (v1.2.6.0) wia Zadig http://zadig.akeo.ie/ Atmel Studio 6 and 7 works...
Friday, 2 October 2015 - 07:56
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
https://www.avrfreaks.net/forum/u...
Wednesday, 1 April 2015 - 15:53
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
Hi, guys! Now s did experience with WindowsXP SP3 x32, installing latest Atmel Studio from 1st post. All work fine! Compiled LUFA version 140928 with some changed code work OK!...
Wednesday, 1 April 2015 - 15:51
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
Author of LUFA too? https://www.avrfreaks.net/users/a...
Wednesday, 1 April 2015 - 07:17
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
anybody here?
Tuesday, 31 March 2015 - 23:01
AVRISP mkii LUFA (not) connected in Atmel Studio 6.2.1563 & Studio 7!
MCU          = at90usb162 ARCH         = AVR8 BOARD      ...
Friday, 27 March 2015 - 09:39
Best config prescaller and etc. for ADC in Tiny, need solution
larryvc wrote: mixer188 wrote: _delay_ms() very slowly, real delay time not correct Are you running this on real hardware or in the simulator? programmed chip
Monday, 16 February 2015 - 08:49
Best config prescaller and etc. for ADC in Tiny, need solution
Which take time after power on to the ADC was ready to give stable data from resistor attenuator? I did this delay Its true?   unsigned int delay_adc(void) // Delay for...
Monday, 16 February 2015 - 00:16
Best config prescaller and etc. for ADC in Tiny, need solution
yes, 8 mhz & diveder 8 work ok 6.4 mhz i do not used
Saturday, 14 February 2015 - 17:18
How to get a working ADC? ATMEGA328P
ADCSRA |= (1 << ADSC); _delay_ms(10); while  (ADCSRA & (1 << ADSC)); adc_tmp = (ADCL | (ADCH << 8));       
Saturday, 14 February 2015 - 11:27
Best config prescaller and etc. for ADC in Tiny, need solution
okay, i now use 6.4 mhz compatible tiny15 mode (fusebit) and recompile project for this frequency _delay_ms() very slowly, real delay time not correct  
Friday, 13 February 2015 - 20:59

Pages