Type in the full discussion title or a part of it.
Discussion Title Created date
Bad batch of ATXMEGA256A3?
Hi all Some help would be appreciated. We have developed our project on ATXMEGA256D3, while planning to use ATXMEGA192D3 in production. We have received some ATXMEGA256A3 samples...
Wednesday, 17 March 2010 - 13:52
ATXMega192A3 vs ATXMega192D3
I have found on the Atmel website references to both a A and a D version of this device (ATXMega192) Does anyone know what the difference is supposed to be? I could not see...
Monday, 28 December 2009 - 12:42
creating NOISY mains..
I have a circuit that needs to be able to withstand some bad mains power supplies and keep on working. I would like to test it without spending $$$ on EMC testing. Any ideas on...
Monday, 27 June 2005 - 11:10
M128 flash gets trashed?
Hi all I have seen this happening a number of times: the M128 runs fine for a long time and then one day when you switch the circuit on, it is dead or it is just funny. If you re...
Thursday, 19 May 2005 - 10:24
Sending an MMS using a GSM modem
Hi there.. We are trying to send an MMS message from an AVR with attached GSM/GPRS modem. Has anyone done this? :?: It is difficult as hell, not at all like sending an SMS...
Wednesday, 13 April 2005 - 16:19
ever heard of AT76C711 anyone?
Apparently an AVR with bad-ass USB device port on-chip. :P Quote:The AT76C711’s architecture consists of a USB Interface with a devoted DMA controller for fast transfers of data...
Friday, 19 November 2004 - 09:56
preserve SRAM contents during reset..
Hi there Is there a way that I can specify that the compiler must NOT initialize SRAM variables after reset? I have some variables that get overwritten after a reset to wake up...
Thursday, 18 November 2004 - 07:29
making your own solder tips...
Hi there I have been wanting to make my own soldering iron tips for as long as I have known how to solder. There is always an odd shape that I can think of that is not available....
Friday, 5 November 2004 - 09:19
M128 A2D Input Impedance?
Hi there My copy of the M128 datasheet lists the ADC analog input resistance as TBD Mohm. Now my datasheet may be a bit outdated. Does anyone have this figure for me, or maybe a...
Wednesday, 3 November 2004 - 14:05
Sagem MO110D GSM Module headaches
Hi All I have this here MO110D GSM module that doesn't seem to be doing anything... :cry: I read through all the datasheets and appnotes available, but there is a lot of info...
Sunday, 1 August 2004 - 13:03
nice CMOS camera kits?
I am looking for a small camera board with CMOS image sensor that I can hookup to a M128. preferably a simple -as-possible solution with 640x480 B/W anyone with links? -google is...
Thursday, 18 March 2004 - 08:42
Mega256
Hi all Has anyone been able to lay their hands on the Mega256 yet? They promised me samples but I haven't seen any yet.. :evil: For those who don't know: basically a souped-up...
Friday, 27 February 2004 - 12:34