Type in the full discussion title or a part of it.
Discussion Title Created date
IAR EWAVR and LiveWatch window
As u know, IAR EWAVR C-CPY debugger do not support LiveWatch window while working through Dragon driver. This is trouble for me. I cannot find any way to view a set of variables...
Thursday, 15 December 2011 - 17:08
Programming interface failed
ATmega169P has been programmed by AVRstudio v4.18.700 in WinXP SP3 in two ways. Firstly, the ISP method has been used with success, but JTAG programming not possible after ISP...
Friday, 6 August 2010 - 10:54
Problem with AVR Dragon HVPP mode (ATmega16 and other)
I experience hard problem with AVR Dragon HVPP programming. Working under AVR Studio v4.14 software and it's Dragon firmware do not allow to program any AVR devices in this mode....
Saturday, 6 September 2008 - 11:15
ATtiny45 timer1 issue
I wrote small program for ATtiny45 to produce PWM frequency on OC1B (pin3) as 32MHz/4/256=31250Hz=Fpwm: __C_task void main(void) { SETUP(OC1Apin,OUT0); SETUP(OC1Bpin,OUT0...
Thursday, 14 August 2008 - 07:35
AVR Studio v4.14 b589 read EEPROM to simulator problem
Since the programmer interface has been rewritten in last aStudio versions I cannot read EEPROM contents to the simulator window by pressing the READ button. Is it possible in v4....
Sunday, 18 May 2008 - 17:06
ATtiny461 questions
I write small program for ATtiny461: __C_task void main (void) { unsigned char i; unsigned int tmp; unsigned long AdcSumma=0; ADCSRA = BIN(10010101); // ADC 250kHz,...
Monday, 22 October 2007 - 02:26
ATtiny461 ADC problem
I found a problem that ATtiny461 ADC cannot quickly switch from single ended input to differential for single conversion ADC mode with ADIE=1 for update ADMUX and create next...
Friday, 12 October 2007 - 16:15
Again about AT86RF211
1. I would like to buy some AT86RF211 chips. 2. I can't plan to buy AT86RF211 Dev. Kit, because I want to program this chip by myself. 3. Not possible to understand how to program...
Monday, 29 March 2004 - 00:52