Post Created date
ISP debug suggestions/experiences, ATMEL ICE uses & benefits to JTAGICE mkII
Im sold, i think the Atmel-ICE would be a tool i can use. Will be fun to read registers and stuff. 
Sunday, 6 December 2015 - 06:54
Where to find old CD-drive-audio-like connectors cheaper?
"sky high", that was a little funny. 
Wednesday, 28 October 2015 - 05:54
The best way to get 5V for supplying ICs
Your micro controller may run fine and slow, but fast enough on your 3.15v battery. Here's from an attiny datasheet:  Speed Grade – ATtiny25V/45V/85V: 0 – 4 MHz @ 1.8 - 5.5V...
Saturday, 5 September 2015 - 15:31
Nice Multimeter probes.
Iv had some vintage probes that had sharp tungsten inserts, came with an old navy oscilloscope i bought. 
Saturday, 5 September 2015 - 08:36
The best way to get 5V for supplying ICs
I used a resistor and a 5.1v zener diode to limit the current as close to the amount of current needed with some overshoot power loss through the zener and a 9v supply . 
Saturday, 5 September 2015 - 08:31
Thousands of components, transistors, capacitors, resistors,opamps and logic chips. Im considering listing parts goody bags.
CHIPS: just a heads up, i will edit this list with descriptions after looking at the data sheets. lm358 74f04pc 74s37n sn74ls10n sn74ls90n gal16v8d 15lp mc14584bcp TLO72cp...
Monday, 24 August 2015 - 17:58
Capacitive Sense on motorized fader
Cool, id like to go through and try your code out when i get done with some projects. 
Tuesday, 18 August 2015 - 10:00
Small SRam
Jameco has some various sram chips in dip package, parameters are all over the place though. http://www.jameco.com/webapp/wcs...
Sunday, 16 August 2015 - 23:06
Capacitive Sense on motorized fader
Is there noise on your slider when checking from the ground of your micro controller to your slider? 
Monday, 10 August 2015 - 22:48
Capacitive Sense on motorized fader
This guy has the concept working, even though his *capacitor is of different construction without physically touching it to change capacitance: http://www.nerdkits.com/videos...
Monday, 10 August 2015 - 22:44
Capacitive Sense on motorized fader
Debugging this possible solution may be tricky.  Various forms of test methods could check whether a finger touch is having the desired effect. You could have the counted...
Wednesday, 5 August 2015 - 16:06
Capacitive Sense on motorized fader
An easier idea that could be worth testing: Have the 16bit counter running at CPU clock speed,  Have an MCU output pin toggle high and reset the timer/counter  to 0 at...
Wednesday, 5 August 2015 - 06:43

Pages