Post Created date
ATiny1614 'TCA0_SINGLE.INTFLAGS' Undeclared Compiler error
kabasan wrote: Along with Clawsons correction and seeing your way, I now see how period spacing in the way to go for the registers.
Friday, 15 June 2018 - 17:14
ATiny1614 'TCA0_SINGLE.INTFLAGS' Undeclared Compiler error
clawson wrote: /* 16-bit Timer/Counter Type A */ typedef union TCA_union { TCA_SINGLE_t SINGLE; /* 16-bit Timer/Counter Type A - Single Mode */ TCA_SPLIT_t SPLIT; /* 16...
Friday, 15 June 2018 - 17:11
Boot loader Append/Bootend size selection logic (Attiny1614/Xtiny)
kabasan wrote:The difference is whether it is affected by lockbit or not. In reading the XMEGA-A manual (pg. 20) it mentions : Application Table Section which talks about lock...
Wednesday, 30 May 2018 - 06:28
Attiny1614 datasheet (Microchip), not easy to navigate vs Old Atmel datasheets
The iotn1614.h file shows this code: /* PORT.PIN0CTRL bit masks and bit positions */ #define PORT_ISC_gm 0x07 /* Input/Sense Configuration group mask. */ #define PORT_ISC_gp...
Tuesday, 22 May 2018 - 08:34
Attiny1614 datasheet (Microchip), not easy to navigate vs Old Atmel datasheets
My original post is now kind of nonsense after learning about the Attiny1614 chip. My real issue is that the Attiny1614-17 are Xmega type tiny's which i am completely green to...
Tuesday, 22 May 2018 - 06:38
Atmel ICE tiny wires, cheapness slap to the face.
I will definitely look into that. If i can use the ICE to solve some problems then it pays for itself. Im ok with spending money but not on a product that may loose support or if...
Friday, 11 May 2018 - 17:34
LED indicator for software debugging :)
Just stopping by to show and tell that i found my bug. I have a counter variable in an Interrupt for cycling a PWM sine array. That interrupt and PWM output needs to be active in...
Wednesday, 14 March 2018 - 22:58
LED indicator for software debugging :)
Thanks Larry, I am sure the idea will pay for itself soon enough.
Tuesday, 13 March 2018 - 18:41
LED indicator for software debugging :)
No question, just a long intro intro into me discovering using an led indication to help debug my code. I could shorten it.
Tuesday, 13 March 2018 - 18:31
BOD speed, size of filter cap on vcc when powering down?
Say i were to shut off power to the MCU rapidly through a transistor powering the chip without a filter cap on vcc, is this an example that is open for eeprom corruption...
Monday, 19 February 2018 - 19:58
DAC using PWM : Valid low pass filter?
If you have an oscilloscope and a sine wave sweep generator you can hook up to the X-Y of the o-scope and view the frequency response of a filter within your sweep range. I played...
Friday, 17 November 2017 - 06:22
Starting the Xmega produces spikes
Could try a relay to disconnect the output until a few seconds of power up. I think that is what stereo equipment does, most anything i always hear a relay click after being...
Friday, 26 May 2017 - 13:57