Type in the full discussion title or a part of it.
Discussion Title Created date
Manual USART simulation with QuickWatch data manipulation
Hey, thought i would share an (if not so obvious) way i finally found out how to test USART data receiving simulations for my midi project without simuli files.  In the USART...
Monday, 13 July 2015 - 07:53
The Genesis of the Transistor, Bell labs / AT&T video from 1965!
Video is good so far, had to come share mid way through.   https://www.youtube.com/watch?v=...
Monday, 6 July 2015 - 00:08
Bread board capacitance and external Crystal Clocks
Running an ATtiny4313 with an external 12Mhz crystal on a breadboard, the manufacture says to use 32pf caps with it. It started up running fine without the caps so I decided to...
Thursday, 2 July 2015 - 01:15
Frequency capture/ blinking regurgitator via Input Capture and software calculating the clock cycles. Software works one way, not another. Play with if you wish.
Im working on different ways of doing a frequency counter and will be trying the Atmel F/C note later, currently mainly in the audio frequency range. Working with an ATtiny4313,...
Monday, 9 March 2015 - 00:06
Data Packet Start bit + Uart clarifications
A standard 8 bit data packet from what iv read pulls low for the start bit and after 0-7 data bits pulls high for the stop bit for a total of 10 bits of clocked space. ...
Tuesday, 3 March 2015 - 01:43
Byte pinching, swapping int' for uint8_t
I have some code im playing with that is a tick and execute state machine' os (i guess what you call it) and all my integers were int types, the code compiled to 552 bytes of...
Thursday, 6 November 2014 - 20:16
ATTiny45, TCCR1-CTC1 enabled, interrupt flags only working with OCR1C
I have this code using global interrupts to toggle pin 0 on PORTB. The CTC1' clear timer/counter on compare match is presumably only working with TCNT1 'matching' with OCR1C and...
Monday, 3 November 2014 - 10:45
Branch Graph for AVR timers?
/* As a new learner to micro-controllers i have been been writing out the processes of using the the timers to an end result in a branch graph style to help understand the flow...
Saturday, 1 November 2014 - 03:54