Post Created date
Strange "LED blinking".
The problem is that it is blinking? And where is your never-ending loop in main? The program reaches the end of main and the MCU will eventually (hopefully) end up back at the...
Monday, 23 August 2004 - 07:31
could you post some code?
Monday, 23 August 2004 - 07:26
can insight run without a real device?
You are enabling the watchdog timer while debugging using a JTAG-ICE am I correct? If you enable the watchdog timer, the MCU will reset after the watchdog timer expires, even...
Monday, 23 August 2004 - 01:55
You could scale it and edit your own message, including changing the image.
Sunday, 22 August 2004 - 22:55
My STK500 cannot program an ATTiny2313
theusch wrote:[Remember that high-voltage parallel programming will not work on that chip.] Oh yeah, I forgot about that. See and the errata...
Sunday, 22 August 2004 - 22:49
My STK500 cannot program an ATTiny2313
How did you try to program the chip? ISP in your target hardware? ISP on the STK500? High-voltage on teh STK500? Is the chip inserted the correct way in the red, 20-pin socket?
Sunday, 22 August 2004 - 21:00
How to define (reserve) the "stack space"
All you should need to do is initialize the stack pointer. If you _really_ want to, you could put a label in your .dseg after your last .byte directive so that you can point to...
Sunday, 22 August 2004 - 20:06
AVRASM2: problem using #define, .def/.undef, and macros
I found the problem in my code. One of my lines was... #define dest with a newline before saying what dest should be. This set off many more errors. My code assembles now...
Sunday, 22 August 2004 - 03:42
Debugging with Autostep
I don't believe that it has a multi-step, but there is auto-step. If I only need to step 10 or so times, I just click step a bunch of times, but if its more I watch the cycle...
Saturday, 21 August 2004 - 14:10
Mobile Phone keypad interface
LOL....... mkay. Have fun :D
Saturday, 21 August 2004 - 13:14
Mobile Phone keypad interface
micklecat wrote:Nope... mobile phones use telepathic keypress detection. Keyboard controller catches your strong intention to press a key. Have a try - and you'll be sure of that...
Saturday, 21 August 2004 - 13:09
ATmega8 fuses?
gskinner wrote:you said you turned off the reset pin to get more I/O I think that means you can no longer do ISP I think this means the only way out of this is to parallel program...
Saturday, 21 August 2004 - 12:59