Post Created date
ICE3 Debugging hangs
wires wrote:1) USB port is not supplying enough power for the ICE3. Do you think that power consumption depentds on the routine where you set your break point? Cheers, Knut
Sunday, 18 November 2012 - 11:36
ICE3 Debugging hangs
kschwiRG wrote:I think it will be the best to move the whole environment to a M$-VM under Linux and trace the USB channel. :x So here it comes. Another project, another CPU (...
Sunday, 11 November 2012 - 11:10
ICE3 Debugging hangs
poppirs wrote:@Knut: Do you mean only the file where the breakpoint is? It's around 200 LOCs.Christian, thanks, its only about the subroutine. To find similarities: Is it one...
Friday, 9 November 2012 - 07:27
ICE3 Debugging hangs
Two things I observed: 1. Pressing on a break point any of the Go-button lights the step LED of ICE3. When it switches off AS6 might responde or not - so it seems to be a problem...
Wednesday, 7 November 2012 - 21:43
ICE3 Debugging hangs
js wrote:Quote:but at my special case AS6 does not accept any input.This is WITHOUT turning the power off to the target?Hi John, no, reaching a breakpoint I press F5 / F10 / F11 (...
Wednesday, 7 November 2012 - 07:27
ICE3 Debugging hangs
js wrote:Quote: If the target is powered-off the output window of AS6 shows the "Target power lost" message I usually do a "Stop debug" before turning power off/on to the taget...
Wednesday, 7 November 2012 - 06:45
ICE3 Debugging hangs
Hi clawson, clawson wrote:Quote: the ICE clock is 1.99MHz That sounds too fast. I know the limit is 1/4 but that's very close. thanks for the advice. When involved to a problem...
Tuesday, 6 November 2012 - 19:00
Strange behaviour while stopping Jtag-debugging
js wrote:Quote:My expectation is: The Jtag ICE removes all breakpoints from the controlle WRONG expectation. Just click on the "remove all breakpoints" or reprogram the chip....
Tuesday, 27 March 2012 - 05:50
ZigBee vs. 6LoWPAN
stevech wrote:Your requirements didn't say if you must have a mesh network (relays) or not. Two things I did not mention: My motes are powered by mains. There is no need to watch...
Tuesday, 11 October 2011 - 09:14
Is available the Linux version for AT32UC3?
Hello everyone, eaanon01 wrote:Have a look here: U-Boot: Linux: this...
Thursday, 16 December 2010 - 07:41
Any microcontroller of atmel fulfilling my requirements
Serial I/F's can also be handled by external serial devices (e.g. max3100). The major question is: What is the transmission speed? What do you want to do internally with the data...
Thursday, 22 January 2009 - 08:31
Winavr 20081205 problems
What do you think should be stated in the bug report? My suggestion is: "The programmer is unable to read the libc documentation therefore make the compiler behaivor as the...
Thursday, 22 January 2009 - 08:22