Post Created date
SOLVED: Protection against external power supply
haha yeah, that's true! I meant "... contributed to find a solution to the problem!" 
Tuesday, 21 July 2015 - 05:57
SOLVED: Protection against external power supply
Hello everyone!   So, I’ve found a solution for my problem. It has some impacts on the cost, but nothing very significant.   It’s a voltage regulator with reverse...
Monday, 20 July 2015 - 11:55
SOLVED: Protection against external power supply
Haha Yes, the label mentioned by Cliff is funnier than mine…    This circuit will be used to test different kinds of sensors, so I can’t say right now what is the max...
Monday, 1 June 2015 - 08:54
SOLVED: Protection against external power supply
Hello Everyone! Thanks for the fast reply.   So, answering some questions…   The DC connector is necessary to power the sensor. The board will be later in a case and I...
Thursday, 28 May 2015 - 08:27
Bitwise operations
Here too!
Wednesday, 20 May 2015 - 11:39
Receive data with Mass Storage bootloader (LUFA)
Hello Clawson, thank you again for your reply!   Yes, I was already looking to this part of the code and I also saw that when I eject the USB device, it also works (jump to...
Wednesday, 6 May 2015 - 08:16
Receive data with Mass Storage bootloader (LUFA)
BTW, I forgot to mention something that I think it is important. I cannot use an external push button to reset the uC. It has to be done automatically by the software. After the...
Tuesday, 5 May 2015 - 12:39
at90s1200 to attiny2313
Hello,   You have to be more specific about your problem... and about your goals... it's hard to understand what you need...  maybe show us the code? And which timer are...
Tuesday, 5 May 2015 - 11:18
Receive data with Mass Storage bootloader (LUFA)
Ok, I will try to contact him… I thought he was also active here at avrfreaks…   Thanks again!
Tuesday, 5 May 2015 - 08:55
Receive data with Mass Storage bootloader (LUFA)
Hello again,   So, I used the Command prompt copy, instead of drag/drop… it didn’t make any difference… After I replace the bin file, the bootloader is still not jumping to...
Tuesday, 5 May 2015 - 08:41
Receive data with Mass Storage bootloader (LUFA)
Ok, so you are saying that the bootloader jumps to the app automatically after the bin file is updated? As this is not happening here, I thought that I should write this somehow...
Monday, 4 May 2015 - 12:57
delay_ms
And there is a very nice tutorial on Timers here!
Monday, 4 May 2015 - 12:00

Pages