Post Created date
ATmega 328p Timer2 not working
I did answer these two: I haven't played with electronics for a couple of months but that's no excuse for forgetting about the fact that timer2 is 8bit. Thanks for that.  
Monday, 13 January 2020 - 13:34
ATmega 328p Timer2 not working
I asked that question myself a lot in my head but couldn't find the answer.   I'll check the uart implementation later on when I get back home from work. Maybe my memory is...
Monday, 13 January 2020 - 10:58
ATmega 328p Timer2 not working
Hey clawson,   I am aware of the fact that ISR routines should be as small as possible. It was just for debugging purposes - yes, I could've used a built in LED but I wanted...
Monday, 13 January 2020 - 09:50
ATmega 328p Timer2 not working
Hey guys !   Thanks for responses.   As for your advices to print the section I'm currently working on - I don't do that but I do go through the list of registers and...
Monday, 13 January 2020 - 09:43
electrolock not being switched by transistor BD911
Thank you for your interest in my question!   I now understand the issue and have solutions, I will probably use the one proposed by @the_mios because as he guessed correctly...
Thursday, 14 December 2017 - 08:44
electrolock not being switched by transistor BD911
Thank you for your comments! I will use your advice, @ka7ehk (I will have to read about both solutions, and will decide then; I will of course take your advice about picking the...
Wednesday, 13 December 2017 - 18:30
atmega8 adc - always same readings
Yes, I'm looking right at it but sadly I'm not a electronic engineer so I have no idea how to calculate the capacitor's value.
Monday, 30 October 2017 - 20:19
atmega8 adc - always same readings
Thank you for your replies! I cannot explain how embarrassed I am for this ADLAR bit being set to 1 ;). After leaving it as 0 and returning ADC instead of my messy (still not...
Monday, 30 October 2017 - 19:58
Split from: Recovering from a "locked out" AVR
BTW 0xE1 is the default value for lfuse for both mega8 and mega32 so assuming your operation worked as expected what were you hoping to achieve anyway? You were setting a new...
Friday, 20 October 2017 - 14:23
Split from: Recovering from a "locked out" AVR
No, Sir, you did not waste your time, it's a great tutorial! I may not have read all the words in the thread but I jumped from problem to problem and from what I can see people...
Friday, 20 October 2017 - 13:55
RTC with ATmega328P (ARDUINO board)
Oh yes, sure, I'm sorry for garbage in the code. I used that rtc module in schematics because I couldn't find PCF8563 and I only needed something in so8 package. So it's not x1205...
Saturday, 28 February 2015 - 10:21
RTC with ATmega328P (ARDUINO board)
@Ross Sorry, I don't understand why I shouldn't be using preprocessor directive 'define'. It's not from arduino world.   @Kartman Unfortunatelly the pin named 'VBACK' is...
Saturday, 28 February 2015 - 07:15

Pages