| Discussion Title | Created date |
|---|---|
|
ATmega 328p Timer2 not working Hey guys, I know there've been hundreads of topics regarding this but I've spent a lot of time already and have no idea what's wrong. My goal is to run timer2 on my arduino... |
Sunday, 12 January 2020 - 22:44 |
|
electrolock not being switched by transistor BD911 Hi everyone! I've just created a PCB, it's soldered and everything. Its main goal is to switch an electrolock on and off. The problem is - it doesn't do its job. I replaced... |
Wednesday, 13 December 2017 - 17:33 |
|
ATmega328P - PCINT0_vect is never called Hey guys, my goal is to have 4 push buttons (PB1-PB4) and wait for interrupts they will cause while being pushed. It's a very very easy thing to do, I'm aware of that but... |
Friday, 24 November 2017 - 17:28 |
|
atmega8 adc - always same readings Hi everybody, I know this subject's been done over and over again, there are plenty of tutorials on the internet but still I can't get my atmega8 convert voltage more than... |
Monday, 30 October 2017 - 18:54 |
|
Split from: Recovering from a "locked out" AVR Hey everybody, I've got a problem. I just locked my 3 uCs: 2x Atmega8L and Atmega32A. I set all of them to use internal oscillator, for example I used following command for... |
Friday, 20 October 2017 - 13:26 |
|
RTC with ATmega328P (ARDUINO board) Hello everybody! First of all, I'd like to say I'm using ARDUINO board but I don't use ARDUINO IDE - I work with Atmel Studio 6.2 instead. That's why I'm posting here... |
Wednesday, 25 February 2015 - 20:09 |
|
Antenna for a GPS module Hello everybody! Some time ago I decided to play a bit with a GPS module so I bought one, this one: http://www.tme.eu/en/details/gts... . The problem is I was too excited... |
Sunday, 22 February 2015 - 23:40 |
|
HC-SR04 ultrasonic ranging module with interrupts Hello ! I've been trying to win with my HC-SR04 ultrasonic ranging module and make it work but after many approaches I couldn't do it. I am using Arduino UNO but I don't want to... |
Sunday, 31 August 2014 - 17:10 |