Post Created date
1 sec delay LED with timers
Check out Dean’s TUT on AVR Timers. https://www.avrfreaks.net/forum/...
Saturday, 21 March 2020 - 16:25
Error        ld returned 1 exit status    FreeRTOS_Tutorial    collect2.exe    0
Hi All, Thought of chipping in. To be able to use Atmel studio needs patience and application. For new users it is a very frustrating. For those aspiring to be experts in embedded...
Friday, 20 March 2020 - 05:34
Rotary Encoder To Set Count on Four Seven Segment Digits
Or stepping the code in a debugger. Which debugger can be used with Arduino IDE for such a purpose? 
Thursday, 27 February 2020 - 08:34
Adding Programming tool "USB ISP" in AS7
I have now started to use the Arduino IDE and can compile for the Atmega 32/16/328/8s.... with MCUDUDES mighty and mini cores. The compiled code can be uploaded using the upload...
Thursday, 20 February 2020 - 05:53
Rotary Encoder To Set Count on Four Seven Segment Digits
Thanks a plenty to who-me, awneil, avrcandies for piointing out glaring mistake in the code. You folks are masters at your game! I have modified the while loop as below, now ...
Monday, 17 February 2020 - 04:35
Rotary Encoder To Set Count on Four Seven Segment Digits
Start at CPU reset with all four LED digit digit displays off.  Set an uint8_t variable to 5.  Test the encoder.  With each activation, increase or decrease the...
Sunday, 16 February 2020 - 20:12
Rotary Encoder To Set Count on Four Seven Segment Digits
Simonetta wrote: Start at CPU reset with all four LED digit digit displays off.  Set an uint8_t variable to 5.  Test the encoder.  With each activation, increase or...
Sunday, 9 February 2020 - 17:30
Rotary Encoder To Set Count on Four Seven Segment Digits
awneil wrote:   I think OP is trying to model a thumbwheel interface:     I guess that might be the familiar/traditional interface in her/his context (a coil...
Monday, 3 February 2020 - 20:20
Rotary Encoder To Set Count on Four Seven Segment Digits
Who-me wrote: ka7ehk wrote:   5. The incremental encoder is independent of all this. It simply provides count "commands" to the decimal number counter. 6. So, YOU need to...
Monday, 3 February 2020 - 15:49
Rotary Encoder To Set Count on Four Seven Segment Digits
The encoder is being used as a device to set the count from which to count down. Yes a photo interrupter or a hall effect sensor will be used to count the revs. The code in my...
Monday, 3 February 2020 - 15:41
Rotary Encoder To Set Count on Four Seven Segment Digits
Kartman wrote: PORTB &= (0b00000000);  It should have been this PORTB &= (0b11110000);I will need some time to implement the look up table lead from you, will...
Saturday, 1 February 2020 - 11:40
Rotary Encoder To Set Count on Four Seven Segment Digits
This is my code to start with all four digits with 0. How do i make each digit selectable with a switch to set its value 0 to 9? //Atmega8 @16MHZ #include <avr/io.h> #...
Saturday, 1 February 2020 - 09:01

Pages