Type in the full discussion title or a part of it.
Discussion Title Created date
Where to download Jungo driver 11.5?
Guys, I'm still using AVR Studio 4.19 which comes with Jungo driver 10.2. My Olimex AVR-ISP-MK2 programmer works fine with it under Windows 7 but it's a no-go under Windows 10....
Saturday, 26 December 2015 - 03:09
Studio 6.2.1153 & Olimex AVR-ISP-MK2 programmer
I simply cannot get this combo to work. Studio 6 detects the tool, even indicates that it's disconnected the moment the USB cable is disconnected but says "Unable to connect to...
Thursday, 4 September 2014 - 04:02
Studio 4.18 SP3 crashes when assembling
Doesn't happen all the time but frequent enough to be a nuisance. Vista reliability index dropped from 10.0 to 3.54 before going back to Studio 4.14. O/S - Vista Ultimate SP2...
Thursday, 25 November 2010 - 21:42
Nu Horizons
Hi, is "Nu Horizons" a reputable source for electronic components these days? Thanks!
Monday, 30 November 2009 - 19:06
"Debouncing" pots
Using an Atmega48 to read 20K pots using assembly. I find the ADC returned value "bounces" between adjacent values regardless whether 8 or 10 bit resolution is used. With an 8 bit...
Monday, 10 August 2009 - 15:06
Where to buy ATMEGA48PA-AU?
This is the 32TQFP package. ATMEGA48PA has replaced the ATMEGA48 which is still available in abundance.
Tuesday, 21 July 2009 - 19:13
Refrigerate after stenciling/pick&place
The solder paste I'm using allows for eight hours between stenciling and reflow. Can one increase that time by refrigerating again? Since PCB assembly isn't exactly my "day job",...
Monday, 1 June 2009 - 15:25
Flashing MCU before reflow
Is it normal to flash MCUs before they are soldered during PCB construction? Thanks!
Monday, 9 March 2009 - 14:17
AVR Studio 4 and Vista
I run studio 4 on several XP boxes and one Vista box. When restoring a backup of a .asm file I normally just run a copy batch file in a CMD Window (instead of close .asm file,...
Sunday, 5 October 2008 - 14:06
Studio 4 and Vista
I run studio 4 on several XP boxes and one Vista box. When restoring a backup of a .asm file I normally just run a copy batch file in a CMD Window (instead of close .asm file,...
Sunday, 5 October 2008 - 14:04
Atmel assembly bug?
Why is the following assembled without errors on the movw lines? .include "m48def.inc" .equ Fool =0x0100 .equ Fooh =0x0101 .equ Bool =0x0102 .equ Booh =0x0103 ldi XL,2 ldi XH,...
Monday, 3 December 2007 - 02:58
Assembly subtraction in least amount of clock cycles......
I want to put the difference (sign is not important) between XH:XL and YH:YL in XH:XL, so far this seems to work after trial and error; sub XL,YL sbc XH,YH brcc...
Wednesday, 13 June 2007 - 18:57

Pages