Post Created date
Problem with Pico]OS function 'posTimerSet' on ATmega32
Hi again, Solved the problem! Before using a semaphore you not anly need to declare it, but you need to allocate it as well. The following code will take care of that. For further...
Saturday, 6 June 2009 - 19:41
Atmega32 input voltage limit protection diodes
Hi, If you're using a comparator inbetween and the supply voltage for that comparator is 5V (or 3V), then you only need to be sure the input voltage on the comparator is clamped...
Saturday, 6 June 2009 - 14:06
Measure high voltage!!
Hello, Another way could be to put in an precision resistor in series with the load. Use a instrumentamplifier (http://www.ecircuitcenter.com/Ci...) to measure the Delta-V. You...
Thursday, 29 March 2007 - 00:36
IR transmitting
Hello, Well, I didn't have the energy to write a a proper description on how to do this. There are, however, a few pages where you can find information on this topic. The...
Wednesday, 28 March 2007 - 23:53
Debouncing Push Buttons
Quote:Do you have a schematic of that? I don't see how you could do it. Hello, Page 12 in the link supplied shows an RC debouncer (the same link as someone else posted earlier)....
Wednesday, 28 March 2007 - 23:27
Weird asm code error...
Hey again! Jörg: Thanks again, I'm gonna check closer on that! Johan: Hmm, I wasn't aware of that error, so thanx very much for pointing that out. I will take a look at that in...
Monday, 8 January 2007 - 23:26
Weird asm code error...
Hi again, I just want to clearify what happened. It seams my compiler (AVR-GCC) didn't accept me defining the the tempvar as r16 etc, or I defined the wrong way. However, using...
Monday, 8 January 2007 - 18:59
Weird asm code error...
Well hello, Stop messing about. Give us the facts instead of trying to type into the forum what you think you have. ZIP your project and post it here and let us have a look at...
Monday, 8 January 2007 - 16:20
Weird asm code error...
Hi, >Sorry, then I simply don't understand your issue at all. When >I put your two lines into a file CL.S: >and fix the typo and the omission of the -o argument in your >command-...
Monday, 8 January 2007 - 15:13
Weird asm code error...
Hello dl8dtl wrote:What makes you assume the assembler could do anything with your line numbers? Omit them, and you should be fine. The linenumbers are put into the code for...
Monday, 8 January 2007 - 12:09
Makefile can't locate header <avr/io.h>
Hi there, The easiest way to solve the problem is to simple skip the 'avr' making it include this done, you simply add the directory where your avr-headers are located to your...
Sunday, 7 January 2007 - 23:21
sin, cos accuracy in libm is not good enough?
35pixels wrote: One way around the precision problem is to store the whole degrees as an integer, and then store the fractional degrees as a float. Note, you can easily test this...
Sunday, 7 January 2007 - 23:05

Pages