Post Created date
Odd WGMx constants for ATmega328PB?
MannImMond wrote: Yup, we found that too. It's already fixed and will be available in the next released revision.   Hmmm, well apparently it's not in the 7.0.934... which...
Friday, 13 May 2016 - 22:41
Odd WGMx constants for ATmega328PB?
theusch wrote: So, the comment/question/response really deal with the vagaries of one particular [infinite vale?] brand of toolchain?  And not the chip itself, or the...
Sunday, 1 May 2016 - 06:57
Odd WGMx constants for ATmega328PB?
MannImMond wrote: Yup, we found that too. It's already fixed and will be available in the next released revision.   Ok, thanks. BTW, I just managed to check, and Timer4 is...
Saturday, 30 April 2016 - 15:34
mega328PB Testing Status
Who-me wrote: Easy enough to try.   Not when every order from a respectable vendor costs $40 in shipping Thanks for the model numbers though, I put them in my "to do at...
Tuesday, 22 March 2016 - 10:06
mega328PB Testing Status
clawson wrote: You laid out a PCB without building a prototype first? Possible lesson to be learned here I think   Oh boy there are many lessons to be learned here......
Monday, 21 March 2016 - 16:53
mega328PB Testing Status
westfw wrote: Have you tried a ceramic resonator?   I've already designed the PCB with a footprint for a crystal.. even if it works, putting a ceramic resonator there would...
Monday, 21 March 2016 - 16:20
mega328PB Testing Status
Who-me wrote: That means you can help the chip along, with lower values ( as Atmel seem to be doing in spades here  !!) Notice the lowest Xtal CAP load spec of 9pF and PCB...
Monday, 21 March 2016 - 00:42
mega328PB Testing Status
bobgardner wrote: Does it have a clockout pin? Just run that through a buffer and pump it back into the xtal1 pin?   It has a clock out, but at this point I'm not looking...
Sunday, 20 March 2016 - 19:01
mega328PB Testing Status
dkinzer wrote: If you set the fuses for an external oscillator then you need a standalone circuit outside of the AVR that produces the desired clock frequency and that clock...
Sunday, 20 March 2016 - 16:47
mega328PB Testing Status
dkinzer wrote: If you need higher frequencies on these chips that no longer have the full swing oscillator, you'll have to add an external oscillator.  This will no doubt...
Sunday, 20 March 2016 - 16:09
mega328PB Testing Status
Hi all,   I got two ATmega328PB from Digikey (date code 1550), and both of them seem to be unable to work with 16MHz crystals (internal OSC works fine, also 8/12MHz crystal...
Sunday, 20 March 2016 - 15:38
wiring ATMEL-ICE
When I got my ATMEL-ICE Basic, despite all the diagrams and pin tables, I still wasn't sure which pin on the connector itself was pin 1... so I wrote this little post, maybe it'll...
Tuesday, 16 February 2016 - 00:04

Pages