Post Created date
Troubles reading Sig. Byte on Tiny13 Date Code:0432D
OK, the bug must have been the time of day:) found the problem with my connections, seems odd but it works now and did not work at mid night:) Caleb
Thursday, 21 October 2004 - 18:02
Storing/Extracting 30 bits from 88 bit packet
Hi, From the first pictures of what a "1" and "0" are for this bit stream, it seems important to note the 0110 pattern for a 1 and a 1001 pattern for a 0. Just any idea, but if...
Tuesday, 5 October 2004 - 06:13
avr/422 communication
HI, In your last post you said you have an LED on the same line as the Enable's! what is your voltage drop on the LED? This may be ok, but it triggers in my mind that might be...
Thursday, 23 September 2004 - 17:00
Cheap LCD for the Mega169?
HI, I was looking at the same LCD's at All Electronics recently and would like to know what you find out. Thanks, Caleb
Wednesday, 22 September 2004 - 05:28
I need help with an undefined problem - please help
Yes, I know I have added to the list of jokers, but maybe it was time for such a post:) I do hope that those who been helped by this group will understand that when asking a...
Monday, 13 September 2004 - 05:19
I need help with an undefined problem - please help
Ok, Here is the project you asked for. You will need no power to run this goodie and have lots of free time after you are finished connecting the dots. for(int k=1; O(N^3);...
Monday, 13 September 2004 - 05:13
FTDI USB - As good as they claim?
Thanks Colin, I know what I will be getting... Caleb
Sunday, 12 September 2004 - 17:43
How can I check an odd/even numbers with ASM ?
BobSki!, Take out the 18/2 part, then you will get the right numbers. 20-18=2 Caleb
Friday, 10 September 2004 - 16:38
ATmega fuse bits for 12MHX crystal
Hi, I would set the CKSEL for high freq. crystal. CKOPT=1 CKSEL3-1=111 CKSEL0= 1 SUT= as you need I have not run a mega16 above 8Mhz, so this just how I would...
Thursday, 2 September 2004 - 02:35
how do I manipulate 10 bits
Hi, are the 60bits asynchronous or synchronous to a clock source. That is do you have a clock signal coming from the other uC? If you have a clcok I would write a simple...
Wednesday, 1 September 2004 - 03:37
serial data for input PORTB? (i.e PB0-PB7)
HI, I will re ask your question, Looking for 8 serial lines into a AVR. How can this be done? Well here is one thing to think about, what type of serial comm. Asynchronous or...
Sunday, 29 August 2004 - 17:28
converting array to char
HI, this looks like you are working with BCD numbers and wanting to work with 8 bit numbers. so 20:10:00 is 0 in the 1's and 2 in the 10's Right? so take hour[0]*10+hour[1]*1...
Friday, 27 August 2004 - 17:58

Pages