Post Created date
mega128 driving 128x64 graphic display
Take a look at http://www.microsyl.com/ and under Nokia LCD lib or the Graph LCD Lib. Sylvain Bissonnette has done a good job on these LCD lib's and I would think you can use them...
Thursday, 25 November 2004 - 18:19
AvrCalc update
@Bob Just downloaded AVRCalc, dropped it in iccavr's Bin dir. and it works:) Caleb
Thursday, 25 November 2004 - 06:53
ImageCraft Compiler Q
Have you done a test round with AVRGCC? I would check that compiler too, It seems that AVRGCC is getting pretty good these days. Three years ago (about) when I started with the...
Thursday, 25 November 2004 - 06:46
ImageCraft Compiler Q
Hi Royce, What will you be doing with ether compiler? Is this for hobbist use or will this be what you pay your bills with? I use the ImageCraft compiler and yes only the Pro...
Thursday, 25 November 2004 - 03:50
[OFF] Thanksgiving
To Follow Jim, I am also Very Thankful to the folks here on AVRFreaks.net. I have learned a lot by reading over the many posts. Thanks to all! Caleb
Thursday, 25 November 2004 - 03:35
ATmega162: how to know the default speed rate
@ Romez777 The Mega162 ships from atmel running at 8Mhz/8 so you should be getting 1Mhz out of it. Seems that is what you are getting. Read the data sheet on page 36-37. I have a...
Wednesday, 24 November 2004 - 04:25
ADC PROBLEM
HI, 737Mhz, wow that is one fast AVR :) Caleb
Sunday, 21 November 2004 - 17:27
AVR programming for juniors
HI All, The Idea of a graphical programming system for the avr's would be very nice. I have been thinking about this for a year or so, the idea I have seen is to use precomplied...
Sunday, 21 November 2004 - 04:06
port problems with an mega8
HI Karl, Take a look at pages 56-57 of the datasheet for the Mega8. Caleb
Wednesday, 17 November 2004 - 04:30
O/T- Is there any interest in getting local AVR clubs going?
Any one north of Bay Area, CA? I am in Ukiah, CA. It would be nice to find a group work on robotics and other AVR's projects. If I had any free time:) Caleb
Tuesday, 16 November 2004 - 00:27
Picoscope anyone?
Hi, Wayward717, for the last two years I have been using a Picoscope ADC-212. The Scope is very nice. On the ADC-212 when only using one channel, all 128k of ram can be used....
Tuesday, 16 November 2004 - 00:25
CFAG240128DFMIT LCD display
Hi AVRn00b, From the datasheet it looks like you have the -13v(lcd bias) take a look at page 8. Caleb
Wednesday, 27 October 2004 - 17:33

Pages