Post Created date
getting one led to flash?
^ is not power of, it is the XOR bitwise operator.
Wednesday, 14 October 2009 - 07:00
communication b/w microcontrollers
RS485 is great for long distance communication. You will have to devise a serial protocol of your own to use multi-master functionality, or have it master/slave driven (modbus RTU...
Wednesday, 14 October 2009 - 06:58
EEPROM strategies?
If the cell is writing while you lose power, then yes, especially when your data is multibyte.
Wednesday, 7 October 2009 - 21:46
file system based API function calls for MCU
There are optimizations done for a limited number of timing critical components, where the actual latency is not much higher than an interrupt + function pointer call (on a CPU...
Wednesday, 7 October 2009 - 16:48
Can a USB device without VID and PID be used?
Ideally you use the VID and PID of an existing device which your OS understands. The common case for USB AVRs is to use the Atmel VID&PID, which is ok for development purposes...
Wednesday, 7 October 2009 - 05:57
file system based API function calls for MCU
As someone who maintains and ports between various processors for a large code base at work, HALs are really not out of the question for many applications. You could consider our...
Wednesday, 7 October 2009 - 05:14
USB Master
The MegaU series is "brand new", so not easy to find. However, the AT90USB1287 is capable of this, combined with LUFA.
Monday, 5 October 2009 - 22:19
sound chip / text-to-speech for robot
You can always try sourcing the TTS IC from the SpeakAndSpell. TI might still have it listed on their page even. :)
Monday, 5 October 2009 - 17:49
The xMEGA 24/32 bit pointer question
If you need someone to do testing for any patches, let me know when there is something available. I haven't done any GCC hacking in years, so I'm less useful there.
Monday, 5 October 2009 - 06:03
R2R ladder DAC question(s).
How are you streaming the PCM data? What is the source of the data?
Saturday, 3 October 2009 - 06:54
Atmel XPlain board
abcminiuser wrote: Also, assuming the XMEGA uses standard ISP programming, the "AVRISP" project in the LUFA package will give you a AVRISP-MKII clone which can program the XMEGA...
Friday, 2 October 2009 - 16:01
xmega - sample I/O pin at 74Mhz?
At the data rate you want, its not possible directly. As I said before, you can use a FIFO, or even a serial in parallel out single byte registers. Your clock will come from a...
Thursday, 1 October 2009 - 15:52

Pages