Type in the full discussion title or a part of it.
Discussion Title Created date
Can't read input port
I have read all the examples and been through the book. I am having trouble reading a input port. attiny2313 using portd bit 3 as the input. I am just trying to read the bit then...
Friday, 20 May 2005 - 22:15
PWM on Timer2
Having trouble getting the PWM to work on timer2. Got it to work on timer1 with no problem but I need the 16 bit counter on timer1 for timing an external pulse. Atmega8, pwm...
Wednesday, 16 March 2005 - 03:41
itoa compiler error
I've been getting this compiler error which I can not figure out. The code does run with okay results, still I'd like to clean up the warning. I have two arrays, one array...
Sunday, 6 March 2005 - 05:34
Timer0 Interupt
I am using the WinAvr Why does this give me a .052 second cycle? I would expect this code to give me a .0068 second cycle. 8E6 / 256 = 31250 (clk / pre-scaling) 1/31250 = 0....
Thursday, 24 February 2005 - 16:05
ICSP, programing with the Olimex parallel port programmer.
I bought the Olimex parallel port programmer. AVR-PG2B On the website it is mentioned to use the AVR ICSP software, downloadabe from the Atmel website. Stupid question. Pray...
Monday, 7 February 2005 - 14:51
How to figure program size?
What is the best way to figure program size, with the purpose to see if this program is going to fit in the device. Is it the .lst file, by adding up the sizes? For file below...
Wednesday, 2 February 2005 - 15:47
Timer code examples, needed
I could really use some code examples for Timer0, configured as a overflow interrupt and Timer1 configured as a timer triggered by an external interrupt. Please be verbose and...
Friday, 28 January 2005 - 14:56
Printed Circuit Board Mfg - Needed
Need recommendation for a printed circuit board vendor. Low qty, prototype volumes. (10 to 25) Plated through hole, 2 to 3 week turn around desired. Cheap! Thanks
Friday, 21 January 2005 - 00:39
ADC setup
I am going to use ADC0 (Amega16) do I need to set the PA0 pin to in / out / tristate, or just ignore it and set up the AD? From the data sheet it appears the AD mux may switch...
Saturday, 8 January 2005 - 16:01