Type in the full discussion title or a part of it.
Discussion Title Created date
Using a Parallax Servo Controller with a AVR
Is there anyway to use this with an AVR? http://www.parallax.com/dl/docs/prod/motors/ServoController.pdf It doesnt have any timing charts. Im not quite sure how to go about...
Sunday, 1 January 2006 - 01:00
Best Book to learn C for AVR?
I have experience with AVR archetecture and its assembly code. I recently bought the book "C Programming for Microcontrollers" but for someone who has no C experience it is hard...
Saturday, 31 December 2005 - 22:49
Development Board to Compliment the STK500???
I'm looking for a development board that can interface with the stk500. Any suggestions? Thanks Andy
Thursday, 17 November 2005 - 01:18
Can't Program a ATTINY 15?????
I have the ATTINY 15 in the STK500 in the SCKT3600A1 and the short from RST to PB5. When I try to program it in AVR Studio it says "Flash does not match/verify" I tried erasing...
Sunday, 2 October 2005 - 22:54
Inputing a and recognizing a pwm signal
I have a 2313 and want to be able to take a pwm signal from an rc reciever that sends out a 1ms to 2ms pulse every 20ms. I just need the avr to recognize whenever the rc reciever...
Sunday, 28 August 2005 - 17:36
Good Developement board to Compliment the STK500
I have been using a STK500 and a book to get started learning. I am moving right along. I have come to a point where I need a solderless breadboard to do some experiments. I...
Thursday, 18 August 2005 - 23:03
Creating a Hex file
I need to create a hex file with AVR Studio and then program an AVR with BASCOM with the hex. How would I go about doing this?
Saturday, 16 July 2005 - 02:19
NEW To AVR
I have bought and made a DT006 programmer from Dontronics, and have downloaded BASCOM-AVR. I have a AT90S2313 also. Where is the best place to learn about the AT90S2313 and BASCOM...
Thursday, 23 June 2005 - 20:42
Learning BASCOM
I have built a working DT006 with a AT90S2313 installed on it and have downloaded Bascom AVR. Whats the best tutorial for learing about the the microcontroller and bascom? Thanks
Friday, 27 May 2005 - 05:27
Where to go with a DT006
I have built a working DT006 programmer where should I go now to learn about the AVR? Thanks
Thursday, 26 May 2005 - 04:10
Best Basic Compilers
What are the best BASIC compilers for AVR? All I've heard of is BASCOM AVR. Whats a Good Book to help you get started in AVR's?
Wednesday, 25 May 2005 - 07:23
Programmer for AVR
I have used a Basic Stamp 2 for a while and have decided to move on to the AVR family. I have no experience with programmers because with the stamp I just plugged it into a USB...
Sunday, 15 May 2005 - 23:13

Pages