Type in the full discussion title or a part of it.
Discussion Title Created date
version control
I've been working with AVR's for about a year now, and I'm to the point where my code is getting spread around; projects are being sent to coworkers, old versions projects are...
Tuesday, 22 November 2005 - 23:02
function overloading
Hey, is function overloading possible in winavr's c code (I'm usually a c++ programmer)? When I try it, I get the error "Conflicting types for 'function name'".
Tuesday, 22 November 2005 - 16:13
mega88 -> mega48 eeprom troubles
Hi. I have a function that writes a byte to the next available eeprom address for the atmega88, which works perfectly. I tried it out on an atmega48, and nothing works, not even...
Monday, 19 September 2005 - 17:09
led from an io port
Hi, I was wondering what's the best way to power an led from an avr i/o port pin. I don't want to have an extra transistor like the stk500 does for each led, I'd rather just...
Friday, 2 September 2005 - 14:34
eeprom erasing
Hey. With the eeprom (on the atmega88), if you set the programming mode to "erase and write", is it only the one byte at the current address that's erased, then written over, or...
Wednesday, 17 August 2005 - 18:45
avr butterfly level converter
Hey, I just made something cool with my avr butterfly: a battery powered rs232 uart level converter. Since it already has a uart level converter on the board, you can look at...
Friday, 12 August 2005 - 16:52
fuzzy logic
Has anyone seen a fuzzy logic system implemented on an avr? I searched through the user projects and didn't find anything. It's an interesting subject, and it would be perfect...
Wednesday, 10 August 2005 - 15:49
never thought about it before....
Hey, what does AVR stand for?
Sunday, 7 August 2005 - 04:09
interrupt adds unwanted delay
Hi. I have an avr device that blinks an led on and off. When the led is on, I sample a 16 bit adc value representing the ammount of light reflected back to a photo sensor. When...
Monday, 25 July 2005 - 19:25
isp connector sudgestions
Hi. I need to find a good isp programming connection for some avr boards I'm designing. I don't like the standard 6 pin headder... it's too large, and the headders are sort of...
Monday, 18 July 2005 - 16:28
programmer's notepad hotkeys
Is there a way to add hotkeys to user created tools in Programmer's Notepad (like the '[WinAVR] Make All' command)? I want to set the f7 key to the make all tool to make it...
Wednesday, 13 July 2005 - 19:27
avrdude problems
hey. This may be a common problem, I'm not sure... but I can't seem to get avrdude to work with my stk500 board. If I setup my Makefile in WinAVR with all the correct avrdude...
Sunday, 19 June 2005 - 15:28

Pages