Type in the full discussion title or a part of it.
Discussion Title Created date
BitCloud v3.3 migration problem
Hi guys, I have some problem with my project (based HADevice) when I tried migration from BitCloud v3.2 to v3.3. Most interesting that this error is on HADevice project too....
Wednesday, 30 September 2015 - 08:41
Guys, who can explain to me what CS_NWK_MAX_PERMIT_JOIN_PERIOD_LOGIC_ID is needed? And what does it do? Thank you!
Thursday, 3 September 2015 - 14:19
atprogram.exe: read voltage and reset commands
Hi guys, I need program MCU via command line interface. Atprogram is very friendly but I cannot find reply for two questions: 1. How can I read MCU's target voltage? 2. Is it...
Thursday, 20 August 2015 - 11:45
BitCloud: WakeUp from external interrupt and UART
Hi guys,   The ED is sleeping and waking up from INT1. ATmega256rfr2 must immediatly start to receive UART data (10usec delay bettweet INT1 signal and UART). In...
Thursday, 7 May 2015 - 14:02
JTAGICE3 busy issue
Hi guys,   I am programming MCU in AVR Studio 6.2 via JTAGICE3. But after flash program, at next programming attempt I see "JTAGICE3 busy" message. Only power-on reset...
Monday, 16 February 2015 - 07:58
ETRX3USB + ATmega256RFR2
Hi all!   I try to connect ETRX3USB (as Coordinator) and atmega256rfr2 (as ED) together. But mega does not want to be connected to the network which created...
Monday, 6 October 2014 - 13:17
Hi all.   I use usb + virtual memory (in SRAm) on atxmega256a3u. Computer sees this device as flash drive but I have some problem with FAT. FAT is working only inside...
Friday, 12 September 2014 - 07:34
USART issue
Hi all! I have tried to work with uart without api. When I use uart interrupts (like ISR (USART0_RX_vect)), I see error. Quote:Error 3 multiple definition of `__vector_27' E:\...
Thursday, 28 August 2014 - 14:35
eeprom_read_block function warning
Hi guys, can you prompt me how to get rid form warning (AVR Studio 6.2)? I am using eeprom_read_block(void *__dst, const void *__src, size_t __n) function from avr/eeprom.h...
Monday, 11 August 2014 - 09:54
bootloader atmega problem
Hi all! I have some problem with my bootloader (using AVR Studio 6.2). Bootloader writes flash without any problem. I read flash using programmer and compare both files (original...
Tuesday, 29 July 2014 - 07:27
structure of ELF file
Hi guys! I made some device based on ATmega. It communicates with surrounding world via UDP. I want to add bootloader in atmega. I think I will write PC software which sending new...
Thursday, 10 July 2014 - 11:29
BitCloud ver 3.0.0 OTAU
Hi guys, I have created some network with ATmega256RFR2 (based on WSNDemo project with a lot of changes). It has coordinator and 10 other devices. 10 is both routers and end...
Wednesday, 9 July 2014 - 14:04