Post Created date
Compact boolean array ?
bitfields   http://www.tutorialspoint.com/cp...
Sunday, 3 May 2015 - 20:48
Are SDIO and LCD pins available on UC3-A3 Xplained
SDRAM or SD as in micro-SD-cards? SDIO refers to the latter. SDRAM often uses FSMC/FMC for I/O.    
Sunday, 3 May 2015 - 05:29
Combining a bootloader with an application?
I've seen this many times in the past. I recall that there is no tool. People write scripts and so on to conjoin the .hex for the boot and the .hex for the app. And flash it using...
Sunday, 3 May 2015 - 05:28
Steve Ciarcia Buys Back Circuit Cellar Magazine
I wish we could get the previous subscription prices back!
Wednesday, 29 April 2015 - 04:46
MicroSemi "LoRa" Chips?
I have some Anarduino boards with other radios, and some LoRa modules. I don't see a need in my world to struggle to run at -120dBm. And from what I've read, it IS a struggle to...
Tuesday, 28 April 2015 - 06:03
MicroSemi "LoRa" Chips?
The LoRa chips from several vendors are spread spectrum with a low chipping rate and very low bit rates (as options). Once locked, they thusly have lots of post-detection...
Tuesday, 28 April 2015 - 04:51
ICE - mega328 - breakpoint in ISR not being hit
  All these photos are conCATenated  
Tuesday, 28 April 2015 - 01:59
ELAN microcontroller
google a while. You'll see that ELAN makes tiny memory 8 bit MCUs for odd applications. Kind of a throw-back to 1970's.    
Sunday, 19 April 2015 - 07:08
Does anyone have experience about integrating RF4432 with Atmega8 for wireless communication?
and this   http://www.airspayce.com/mikem/a...   and with this   http://www.anarduino.com/details...   mega8 - too crude. Go with mega328p or better.  
Friday, 17 April 2015 - 07:20
Speeding up Atmel Studio 6.2
An SSD makes a huge difference. I found a 500GB Samsung on sale for a good price.
Friday, 17 April 2015 - 00:46
NXP bought Freescale
History says the buyer (Freescale) gets to cull and kill. Bye-bye LPCs.   Hello NXP Kenits - (an odd word. Sounds like a medical condition).      
Thursday, 16 April 2015 - 06:03
Isolation resistors necessary for SPI devices with opposite phase/polarity?
ckalas wrote: Are isolation resistors necessary for SPI devices on the same bus as the ISP if the device uses CPOL = 1 and CPHA = 1? I'd think not. When the slave select (SS) is...
Sunday, 12 April 2015 - 04:01

Pages