Post Created date
[SOLVED] How to run multiple functions one after another?
Forget ASF, it's pure bloat. Make a simple blinky using ASFs GPIO stuff and see how much code space of your micro it uses and you'll see what I mean.   As far as inheritance...
Tuesday, 8 November 2016 - 14:18
ATMEL ICE cable length max
Maybe I'm missing something here, but would it not be easier to simply use the standard ribbon cable that comes with the ICE, have your ICE closer to the target hardware, and use...
Tuesday, 8 November 2016 - 08:58
Arduino Uno Project Tutorials..
Crumbs wrote: Why not use an H Bridge driver and connect that?   Given that you mentioned robotics, I'm going to assume you want a degree of precision when controlling your...
Monday, 7 November 2016 - 14:05
Charger to MCU? Changing from 5 - 2.5V to 5V - 0V?
Get rid of R30 and replace R64 with a 0R (or bridge it with a blob of solder if its an SMT resistor), and connect the /CHRG pin directly to the IO pin of your micro and use an...
Sunday, 6 November 2016 - 23:03
Okay, not the greatest code sample to work with but I'll go with it - first thing I would say looking at your code, is it's far better to use the pre-defined mnemonics/ constants...
Saturday, 5 November 2016 - 16:22
Post the code you have so far, that way someone can point out where you're actually going wrong. 
Saturday, 5 November 2016 - 15:16
[SOLVED] How to run multiple functions one after another?
wolfrose wrote: But what you mean by: This still isn't really very good in terms of coding though   What I meant is that, assuming you did in fact want to fade one colour...
Saturday, 5 November 2016 - 13:57
[SOLVED] How to run multiple functions one after another?
Think the OP wants to have one fade first then the other wolfrose wrote: When I run the two functions I get the mix color of red and green, where I want the red to run first...
Saturday, 5 November 2016 - 13:32
Atmel Studio 7 - making new project problem
Have you considered LUFA? I've never used it myself so I don't know much about it, but from what I gather it's pretty good. Or, if you only need USB for serial communication...
Saturday, 5 November 2016 - 00:38
Atmel Studio 7 - making new project problem
Unless the headers and libraries you want to use are actually part of ASF then ASF should have no bearing on them. Generally most people familiar with AVR will advise against...
Friday, 4 November 2016 - 22:42
Atmel Studio 7 - making new project problem
I wouldn't bother with ASF for things as straight forward and simple and as GPIO, just read your device's datasheet and use the PORT registers.
Friday, 4 November 2016 - 21:51
[SOLVED] How to run multiple functions one after another?
What Kartman means is that since you only pass in 1 to your functions, it won't be iterating through your first for loop 255 times, it will go through it once. EDIT: IOW, each...
Friday, 4 November 2016 - 20:48