Post Created date
Eclispe with Ubuntu 18.10
When you get these errors, have you tried cleaning the project and then rebuilding? Post the entire build output here, there might be an important nugget of info that highlights...
Monday, 28 January 2019 - 17:58
SPI slave echoes MOSI and ignores Slave output
Without using the SS line, how do you expect your MCU - acting as an SPI slave - to know when the data on the bus is intended for your MCU or another device that...
Monday, 12 November 2018 - 17:54
SPI slave echoes MOSI and ignores Slave output
What's the chip/ slave select line doing? An SPI slave will always write out the previous byte it received for as long as the SS line is active (which is what it you're...
Friday, 9 November 2018 - 17:50
Switch /case with pointer to structure
The reason that this works... struct ADCint *ADCvaluesPTR = &ADC_6;is becuase ADCvaluesPTR is of type struct ADCint *.   struct ADCint ADCvaluesPTR; *ADCvaluesPTR =...
Wednesday, 20 June 2018 - 20:38
Am I losin' it?
No I simply forgot to change it's value  and 10k is the default value.
Sunday, 10 December 2017 - 13:58
Am I losin' it?
As I said in my OP, the H-bridge is not what I was interested in here but still part of the circuit nonetheless, and ultimately was the reason that the part of the circuit that I...
Sunday, 10 December 2017 - 13:57
Am I losin' it?
When Q5 is on Q1 shouldn't be off, that is by design.   When Q5 is off R1 pulls Q1's gate to +24V. When Q5 is on, yes R1 & R3 form a voltage divider that pulls Q1's gate...
Friday, 8 December 2017 - 16:38
Am I losin' it?
Thanks Brian, I can sleep tonight now ha! Perhaps I should look into using Circuitmaker for simulation from now...
Friday, 8 December 2017 - 16:17
Man-in-the-middle hack of RS232 data stream
FYI termite will display data in hex format, you just have to enable it in Termite's settings...
Monday, 4 December 2017 - 20:46
Trying to get an accurate timer with timer2
fabianpi wrote: // target time: 25mS approx OCR2A = 25;   The timer starts counting starts from 0, so that would indeed result in 26ms.   Scratch that, didn't read your...
Thursday, 28 September 2017 - 21:50
Send collected data to windows computer through USB
ki0bk wrote:Then check out V-USB as a starting point. Doesn't V-USB implement USB purely in software via bit banging? The device the OP is considering to use has built in USB, and...
Wednesday, 30 August 2017 - 19:57
Send collected data to windows computer through USB
calvingloster wrote:Using the ATmega16u2 microcontroller as the brain for the embedded device. This will collect and store the data to EEPROM. This chip already has the capability...
Wednesday, 30 August 2017 - 19:35