Discussion Title | Created date |
---|---|
Am I losin' it? I've been simulating some stuff on Proteus 7 and have been struggling to get something to work that, as far as I'm concerned, works on paper - a simple H-bridge. The H-bridge... |
Friday, 8 December 2017 - 15:05 |
Linux friendly PCB Design Software I recently got a new job that involves working with Linux and it's somewhat opened my eyes to it, so I'm considering switching my OS on my personal laptop to Linux (currently... |
Saturday, 3 June 2017 - 14:19 |
Auto-off Switch - High Side Switching vs. Low Side Switching. I'm working on a battery powered project, and I'm trying to implement an 'auto-off switch' (not sure if there's a more suitable term, if so by all means let me know) with the idea... |
Monday, 27 March 2017 - 10:49 |
atprogram AS6.2 v AS7? A system that the company I currently work for buys in from a third party company, supplied us some time ago with a .cmd file for programming their hardware with their bootloader... |
Tuesday, 14 March 2017 - 13:04 |
BQ27441-G1 - Battery Fuel Gauge: I2C Shenanigans? I'm prototyping a battery powered system, and got myself a 'Battery Babysitter' from Sparkfun, which is essentially a breakout board for two devices produced by Texas Instruments... |
Tuesday, 28 February 2017 - 08:58 |
Mini Vs Micro USB Type B Connectors Are there any guidelines when deciding between using mini and micro USB type B connectors when designing electronic equipment/ hardware, or is it just personal preference? I've... |
Wednesday, 22 February 2017 - 12:28 |
Mouse Wheel Encoders I have an idea that involves using a mouse wheel encoder, but I can't seem to find any info on them. Does anyone know where you can get hold of mouse wheel encoders, including the... |
Wednesday, 15 February 2017 - 23:01 |
Migrating RS-232 to RS-485 (or something similar?) Hello all, The company I work for design and manufacture industrial machinery. The current control system used on said machinery works via a main control board, with... |
Friday, 27 January 2017 - 12:47 |
μGUI and RAM usage I have a resistive touch screen that I'm using with an XMEGA A1U Xplained pro. I've ported some of the functions out of an Adafruit TFTLCD Arduino library and so far everything... |
Wednesday, 4 January 2017 - 20:28 |
XMEGA A1U Xplained Pro PC2 pulled high? I've noticed that whenever my Xplained pro's PC2 pin is configured as an input, it's reading high? (via PORTC.IN) I've taken a look at the schematics and for my own life I can't... |
Thursday, 24 November 2016 - 21:42 |
Xmega definitions changed? It's been around 6 months or so since I worked with an Xmega, in that time have all the definitions that become accessible through io.h been changed? I have some code which no... |
Friday, 18 November 2016 - 17:02 |
XMEGA A1U Xplained Pro problem I haven't touched my XMEGA A1U Xplained Pro for around 6 months, but I know for a fact that it was working the last time I used it, however when I tried to run some tests on it... |
Wednesday, 16 November 2016 - 20:37 |