Type in the full discussion title or a part of it.
Discussion Title Created date
ASM - .equ syntax question
Hello,   Long time lurker, the experienced folks on this forum have given me much knowledge over the years, thank you.   This appears to be a simple question but I've...
Thursday, 16 March 2017 - 17:28
Using GPIORx on ATtiny24
Hello, Using assembly and AVRStudio6.2.   Using a Tiny for the first time and was happy to find a mention in the data sheet of 3 I/O registers called GPIOR0,1,2 which I'd...
Tuesday, 23 June 2015 - 00:51
Interrupts do not save registers, correct?
Hello,   Using assembly and AVRStudio6. When I started with AVRs I used the same registers for "general" use and for interrupts (r16,r17,r18).  I didn't give much...
Sunday, 21 June 2015 - 01:41
Changing clock source fuses from AVR code
Hello,   I suspect I can't do this but wanted to check.  I designed the circuit board (didn't have it made yet) planning on changing the clock source fuses of an...
Monday, 25 May 2015 - 02:35
TWI/I2C/SMBus int question
Hello,   I'm learning TWI programming in order to read and write diagnostics to/from eight MSA-compliant SFP modules.  I'll get things going with an ATMega8 because I...
Sunday, 4 January 2015 - 22:12
AVR parametric search with chip package
Hello, I finished my first AVR prototype project and it's working well. The parametric search on Atmel's site doesn't list package type in the search fields. I've ended up going...
Sunday, 20 October 2013 - 17:47
ATmega8 - how to retrieve osc calibration byte for 8MHz
Hello, Finished my first AVR project with the following - Atmel Studio 6.1 Assembly, not C ATmega8 AVRispMK2 running at 8MHz on internal osc Things are working fine but I want to...
Saturday, 19 October 2013 - 22:31