Post Created date
Newbie question about LCD code
I ran into this issue today, and was able to resolve the problem after a bit of trial and error. I was able to get floating point numbers to work correctly after adding the flags...
Monday, 13 August 2007 - 03:24
Wireless Serial Transciever Options?
I have not tried these yet, but Futurlec (http://www.futurlec.com/Radio.shtml) sells the TLP434A and RLP434A pair for $14.00. These are 433.92MHz radios. By the way, do you...
Friday, 3 June 2005 - 01:13
AVR breadboard prototype strange behavior
Thanks for the advice. I'll add the avcc and gnd connections as well. I was using PA0 as an input, not really as an output, with the pull up resistor on, and checking the status...
Thursday, 2 June 2005 - 21:58
AVR breadboard prototype strange behavior
Both Jim and Bingo got it right! I did not have a connection from GND on the breadboard to GND on the STK500. Once I added that, everything worked great! Thanks you all for your...
Thursday, 2 June 2005 - 21:23
AVR breadboard prototype strange behavior
Good question. Where would I have the ground connection? I have the ATMEGA16L connected to ground through the GND pin, and the ISP has 4 connections to ground. Also, the switch...
Thursday, 2 June 2005 - 19:09