Post Created date
Support of ATmega324PB in avr-gcc
I tried on Ubuntu and works fine, but on Debian still not working, any advice to solve this?   I did the patch download and modify avrdude.conf. Its work on Ubuntu but not in...
Tuesday, 8 May 2018 - 11:48
Support of ATmega324PB in avr-gcc
To patch it, I need to download and add the directory in the avr-gcc call? Just it? Because still not working for me...
Monday, 7 May 2018 - 20:51
Support of ATmega324PB in avr-gcc
Someone can give me some instructions to do this on debian? I downloaded the patch and included it on avr-gcc command but did not work. I did the process below and didnt have...
Monday, 7 May 2018 - 14:52
Atmel ICE Basic Help Please ;)
Hi bjohnston24,   Are you got run Atmel-ICE on Ubuntu 14.04? If yes, is possible to run in Debian too? You just update avrdude?
Sunday, 25 October 2015 - 16:53
Counter at 20 Mhz
It's a really good tip!Very thanks Who-me!
Sunday, 15 March 2015 - 01:54
Counter at 20 Mhz
Thank You! But what happen if I use timer 4 of ATmega32u4 to generate a interrupt in a frequency greater than 16 MHz? I think that it's impossible to the cpu to process, so the...
Saturday, 14 March 2015 - 22:28
Counter at 20 Mhz
Hi guys, I have a doubt about this speed of counter4. This work only to control a 3 phase PWM output or I can use this to counter time? I didn't undestand how I can get 64 MHz if...
Saturday, 14 March 2015 - 21:08
A constant current measure of a dc motor with ATmega328
I don't will use the 1 ohm in the definitive project. I have a doubt, if I change the internal reference to 1.1V all peripherals will go work with this reference, including the I/...
Sunday, 21 September 2014 - 20:07
A constant current measure of a dc motor with ATmega328
Thanks! My sense resistor is 1 ohm, because in the moment I don't have a lower. The power supply of lm358 is 5V and 0V? I am testing the same configuration but don't work...but in...
Sunday, 21 September 2014 - 16:03
A constant current measure of a dc motor with ATmega328
I am with difficult to do the signal amplifier. How the better configuration of amp op in this case? How I can combine the RC filter with the amp op? I am measuring the current...
Saturday, 20 September 2014 - 01:59
A constant current measure of a dc motor with ATmega328
Thanks zteshnik for application note, I knew only of the an894. joeymorin I can't measure speed because I can't use a encoder in my project in this moment, but I can estimate when...
Wednesday, 17 September 2014 - 14:07
A constant current measure of a dc motor with ATmega328
I have in mind implement a pid speed, I want estime a speed measuring the current. And my big problem is the oscillation in signal, because this make me calculate wrong speeds. I...
Wednesday, 17 September 2014 - 02:14