Post Created date
Setting Fuse Bits from Hex file
I'd forget the command-line tools, I downloaded them, installed on a clean machine and there was a heap of missing stuff AND out of date Jungo USB drivers. I ended up just using...
Wednesday, 2 May 2007 - 09:22
UBBRH /L
I am not sure what you are trying to do, but you appear to have the right idea for setting up the baudrate divisor. This line will set up both UBBRH and UBBRL using their 16-bit...
Wednesday, 2 May 2007 - 07:33
Bootloader updating itself
I don't think you can change the fuse bits for bootsize under software control from the 'inside'. I could be wrong, but looking at the manual just now, I don't see how yet.
Wednesday, 2 May 2007 - 03:14
jtagice+stk500 on digikey for $150
I guess we just have to sit tight and pretty soon there'll be an STK500, JTAGIce_II and Dragon package. Then we'll have all programming modes covered, high-voltage, ISP and JTAG...
Wednesday, 2 May 2007 - 03:03
Forgetful EEPROM
Interesting Signature Values! They all have bit 6 set high, whether it should be or not, yep, sounds like your STK500 may well be stuffed! Sorry.
Wednesday, 2 May 2007 - 02:53
[TUT] [C] GCC and the PROGMEM Attribute
The strncmp_P() call is missing the 'n' parameter. Prototype in pgmspace.h = extern int strncmp_P(const char *, PGM_P, size_t) __ATTR_PURE__; Or just use strcmp_P() Cheers, Paul
Sunday, 29 April 2007 - 20:01
Forgetful EEPROM
In my eperience, EEPROM corruption is nearly always around power on/off. The solution is to set the brownout (BODLEVEL) fuses at a suItable voltage to stop the micro doing wierd...
Sunday, 29 April 2007 - 07:38
[TUT] [C#] Developer Terminal Software in C# and VB.net
Hi, Not wanting to dis' anyone, my source for serial info and code is usually Jan Axelson, have you seen this? http://www.lvr.com/serport.htm#c... Also, I use uCon from here -...
Sunday, 29 April 2007 - 06:45
Intermittant UART Problems...
Shorting together wires in the RS232 connector is not a good idea. There should only be 2 that are ground, pin 5 which is signal ground and pin 1 which is protective earth/chassis...
Monday, 23 April 2007 - 23:21
Storing configuration data in the ROM
Hi, A tip you might not find in the EEPROM tutorial (if I weren't so lazy, I'd look but my internet connection seems dreadful slow for some reason). If you don't set the brownout...
Sunday, 22 April 2007 - 04:52
My C deal with Microcarl
I used to live in Dundas Valley and often visit the in-laws at Carlingford. I also used to frequent the Computer stalls at North Rocks on a Sunday morning. If you live near your...
Sunday, 22 April 2007 - 02:05
My C deal with Microcarl
Hi John, Well the XML file just incremented vectors by 1, which being treated as 16-bit words was allowing 2 bytes per vector instead of 4. It's all O.K. now, but I still don't...
Saturday, 21 April 2007 - 23:56

Pages