Post Created date
Has anyone done a Micro SD card with the non SPI interface?
breeskin wrote:I was told rightly or otherwise that was making the 3.0 specification available for free, but maybe there is still a licensing issue (??) They made the "...
Wednesday, 20 July 2011 - 12:22
AVR-GCC doesn't include ATmega32A
indianajones11: If you use WinAVR 20100110 and AVR Studio 4.18 SP3, you can call up a new AVR-GCC project using the ATmega32A, and AVR Studio will let you start the project. But...
Monday, 20 June 2011 - 11:15
AVR-GCC doesn't include ATmega32A
You're right. WinAVR 20100110 does not specifically support any unique -mmcu parameter for the ATmega32A. As you also correctly observed, the ATmega32A is completely binary...
Friday, 17 June 2011 - 12:20
Problem with ATTiny40 generated HEX output
I suspect it's a bug in AVR Studio's part description XML file for the ATtiny40. See, for example, this excerpt from the ATtiny40 XML file: AVRSimMemory8bit.SimMemory8bit...
Friday, 10 June 2011 - 11:04
Optimization breaks my multithreading
Kwarf91 wrote:Thanks, I've tried adding volatile to all variables but for some reason it didn't help. Do you know if there exists any multithreading library that allow commercial...
Thursday, 9 June 2011 - 13:12
general avr [interruptible interrupts ?]
snigelen wrote:(for tiny and mega, don't know about xmega) xmega is a different beast in this regard, but let's not go too far down that road unless the OP needs to know about...
Thursday, 9 June 2011 - 12:22
MEGA-1284P Xplained Launched
Adjusting for Cliff's withdraw, I look like #18?
Thursday, 12 May 2011 - 15:13
AVR programming "whys"
Quote: · The programmer device translates the high level commands (AVR910 etc) into a TTL UART bytestream. · A separate chip in the programmer translates the TTL UART bytestream...
Monday, 4 April 2011 - 12:13
AVR programming "whys"
Icanlearn wrote:I can only compare my curiosity to say, someone who grew up in a small town using only mule carts for transport, who moves to the suburbs of a modern city. Any car...
Tuesday, 29 March 2011 - 15:11
UART Multiplexer
Question: Do you need to be on the watch all the time for incoming data that could arrive unexpectedly and/or simultaneously on any of the serial lines? Or do you have a single...
Monday, 28 March 2011 - 18:10
atmega 32 receive buffer
The ATmega32 actually has a 2-position receive FIFO on its USART. That means, the following sequence of events is possible: 1. A byte begins to arrive at the USART receiver. It...
Monday, 28 March 2011 - 12:44
excessed div function
In this particular case, the keyword "volatile" effectively instructs the compiler that it must allow the variable to explicitly go through every intermediate transition exactly...
Monday, 14 March 2011 - 13:18