Type in the full discussion title or a part of it.
Discussion Title Created date
Error building xboot with Atmel tool chain
I've downloaded the latest version of xboot. I'm using the Atmel tool chain as included with AVR studio 6 installed on a 64 bit windows 7 machine. I'm getting the following...
Friday, 13 July 2012 - 19:11
What is the frequency of the peripheral clock?
In the xmega documentation EVERY timer function (spi clocks, ADC clock, etc) is related to a divisor of the peripheral clock. However I can't find in the documentation how the...
Friday, 13 July 2012 - 15:45
xmega256a3u in avrdude, signature bytes
The version of avrdude I have is missing the "a3u" parts, but I know I can just edit avrdude.conf. I was doing that and discovered that the xmega256a3 and the xmega256a3u both...
Thursday, 12 July 2012 - 21:34
Still have ADC issues
In a previous post I didn't notice that I had the unit in diff mode but also in unsigned input. After fixing that I still can't get a true reading. I'm using an xmega256a3u. I...
Wednesday, 11 July 2012 - 20:25
need help with xmega256a3u ADC
I'm trying to make some sense of the ADC in this part. We have an external 2.05 volt reference connected to PA0 and are using the external AREF setting. I'm configuring the...
Tuesday, 10 July 2012 - 17:09
Floating point library in S6 project?
I want to enable the full printf floating point library in an AVR Studio-6 project. I opened the project properties page and selected "tool chain". Under the linker/general page...
Monday, 9 July 2012 - 15:34
Latest tool chain?
Where is the latest tool chain (to run on Linux) that supports the latest xmega avr's (XxxxA3U and A3UB)?? Do I have to download from Atmel?
Friday, 6 July 2012 - 20:53
JTAGICE3 on Linux?
The Atmel users guide for the jtagice3 mentions installing drivers for Windows and how to set up the /dev rules for Linux. http://www.atmel.no/webdoc/jtagi... But is there any way...
Friday, 6 July 2012 - 14:37
nvm_flash_load_byte_to_buffer does not evaluate error
I am using AVR Studio 6 to build a project that uses the xmega256a3u processor. It is build with many of the "older" xmega system drivers for the usart and adc, but the project...
Monday, 25 June 2012 - 19:51
xmega A3 parts, does USARTF1 exist?
I'm converting an application that used the xmega256a3(b) to the xmega256a3u(b) I'm getting a compile error that USARTF1 isn't defined. Well the addresses for USARTF1 are defined...
Friday, 22 June 2012 - 21:07
error moving from xmega256a3(b) to xmega256a3u(b)
We were building a project with the xmega256a3u or "ub" (I think the 'b' is a compatible superset of the "non-b") using studio 5. Studio 5 didn't have support for this chip so we...
Friday, 22 June 2012 - 17:50
xmega256a3bu USB CDC project??????
I cannot seem to create a project using Studio 6 that will include the ASF for a USB CDC virtual serial port that will actually work. I tried creating an example project using...
Tuesday, 12 June 2012 - 18:26