Type in the full discussion title or a part of it.
Discussion Title Created date
AT90USB1287 not compiling
Have downloaded the new includes for the GCC and changed the micro selection in a mega128 project makefile to select the AT90USB1287. I get the error message Quote: main.c:0:...
Thursday, 19 October 2006 - 11:21
AT90mega1287 writting to USB 'stick'
Before I set about pulling out my hair has any body out there used the mega to talk to a USB stick? regards
Wednesday, 18 October 2006 - 11:11
Butterfly RS232 ON The Edge
The RS232 on the Butterfly is a bit unhappy in the real world. When I connect up just the RS232 no power no Jtag then levels from the PC nice and negative. When power is applied...
Friday, 31 March 2006 - 14:49
main not being seen when compiling
I have transferred all bar my make file from a PC on which it would compile on to a laptop running xp home. I suspect this is not relevant but you never know. I now get Quote: avr...
Saturday, 7 January 2006 - 13:16
New Version = Windows failure
Have just loaded up the new version of Studio 4.2 and get Quote:AVRSTUDIO caused an invalid page fault in module AVRSTUDIO.EXE at 0167:0042ae16. Registers: EAX=00000000 CS=0167...
Thursday, 13 October 2005 - 08:59
Free PCB design package
Link to an artical ref free open source EDA http://www.eedesign.com/story/sh...
Thursday, 16 December 2004 - 08:31
New Temperature convertor IC
For those looking at building a multi point temperature monitor this may be of interest. http://www.maxim-ic.com/PRGraphi...
Monday, 1 November 2004 - 11:14
Mega48 reset pin set as IO
When the reset pin has been set into nonreset mode, is it fair to assume that the serial programing mode is now unusable? Has it been proved to be the case by anybody please....
Monday, 9 August 2004 - 18:36
rtc instabiliaty
Noticed a posting about the RTC (32k) osc being prone to miss behaviour if noise on the power rails. Can anybody quantify this problem a bit more please Mike
Saturday, 4 January 2003 - 18:53
Atmel webserver demo board
Can any body assist in converting from the iar 2.24 compiler backwards to the 1.5 version please? Most of the code will compile but there are some 'new' instructions in there I...
Thursday, 25 April 2002 - 09:41