Type in the full discussion title or a part of it.
Discussion Title Created date
AVR and S1D13700 LCD Controller (like SED1335)
Hi all, I'm planning on using a mega128 to drive a S1D13700 Epson LCD controller. This controller is similar to the old SED1335 but it has internal memory and I believe it can...
Friday, 12 August 2005 - 08:20
union and 24bits
Hi all, I want to have 2 unsigned int's but I want them to share a byte so that the high byte of i1 shares the low byte of i2. Is this possible with C? cheers.
Friday, 8 November 2002 - 04:50
OT ft232 again
hi all, I know this isn't AVR specific but I don't know of a better place to post... I have heaps of queries about this chip and the documentation seems to be severly lacking. For...
Wednesday, 16 October 2002 - 09:25
bit OT: FT232 and VB
Hi all, I know this is a bit OT but perhaps someone can suggest a better forum if there is one. I am having trouble working out whether my VB prog has to poll the FT232 to...
Friday, 11 October 2002 - 09:37
RTS & CTS reqd? for ft232
Hi all, Can anyone tell me whether the /CTS and /RTS pins need to be used with the FT232AM for simple serial comms. On all the App notes I have seen they are connected to the...
Wednesday, 4 September 2002 - 08:19
Dataflash on STK500 with codevision
Hi all, Has anyone got any code for talking to the dataflash on the stk500 using the codevision compiler? There was a thread about this a year or so ago but it came to a dead-end...
Monday, 2 September 2002 - 08:10
mega128 development board in oz
Hi all, I'm in need of a development board for the mega128 and a couple of chips. Is there an alternative to the stk501/500 combo (apart from the $$$ AT_JTAGICE)? I'm in Australia...
Tuesday, 16 July 2002 - 10:14
OT: Battery type ???
G'day all, I know this is a bit OT but I'm sure many of you have experienced this type of decision before. I'm developing a portable device that has the following requirements:...
Wednesday, 10 July 2002 - 09:22
AVR talking to iPaq
hi all, I've got a requirement for an AVR to talk to an iPaq or similar handheld. The preference would be via USB. Has anyone got any suggestions to achieve this. I've checked out...
Wednesday, 3 July 2002 - 05:35
avr910 programmer with 2313 and max232
hi all, I built an isp programmer based on the AVR910 app note but used a 2313 instead of the 1200 and also used a MAX232 instead of the transistor/capacitor solution that the app...
Thursday, 18 April 2002 - 11:51
running AVR @ 30kHz
Hi Has anyone tried running an AVR at ~30kHz (BTW I'm aware that the ISP won't work and that an clock source is required, not just a crystal). I'm primarily interested in the...
Wednesday, 20 March 2002 - 13:31
ATmega8L supplier
Hi all, I've been trying but so far have been unable to track down a supplier for the ATmega8L in a TQFP package. I need a price for ~100. Thanks
Wednesday, 20 March 2002 - 13:13

Pages