Post Created date
At90CAN32. How to get rid of Tx Form Error (FERR, FERG) ?
I took a quick look at the new code. In your receiver ISR you never check for CANSTMOB.RXOK being set. interrupt [CAN_IT] void can_isr(void) Then in CAN_init() you enable MOb...
Sunday, 20 January 2013 - 22:55
Avr mega64C1
If everything was correct then the relative include path names in any include file would work perfectly. I'm sure there are other includes with relative path names inside other...
Saturday, 19 January 2013 - 23:54
At90CAN32. How to get rid of Tx Form Error (FERR, FERG) ?
Are you able to create a simple test bed with only two CAN nodes? Next are you able to try a simple MCP2551 connected CAN bus without the chokes using a 120 ohm resistor on each...
Saturday, 19 January 2013 - 16:48
Any experience with AVR LIN/UART hardware?
Thanks for posting the code. One thing in your code does not make sense because the default for the LINBTR.LBTn bits is 32 decimal. This should make your baud rate formula:...
Saturday, 19 January 2013 - 15:23
Avr mega64C1
ntosis wrote:I have changed the io.h file, and i think that its ok..Does this mean you changed the path name contained in the io.h file for the iom64c1.h include from a relative...
Saturday, 19 January 2013 - 15:16
At90CAN32. How to get rid of Tx Form Error (FERR, FERG) ?
MitnikOleg wrote:I've got 158 Ohm resistor between devices.I do not understand what you mean by this. Are you aware that each at90can32 needs another chip to create and connect to...
Friday, 18 January 2013 - 15:59
Avr mega64C1
I looked at my avr/io.h file and found: #elif defined (__AVR_ATmega64C1__) # include Take a look at your avr/io.h file and see what is there. The __AVR_ATmega64C1__ defined...
Thursday, 17 January 2013 - 06:38
Avr mega64C1
See the comment in my last post. You never directly include iom64c1.h, this is always automatically included from the avr/io.h include file. It depends on which AVR chip you have...
Wednesday, 16 January 2013 - 21:14
Avr mega64C1
Does your WinAVR/GCC C compiler support the ATmega64C1? Try searching your GCC compiler directory for an iom64c1.h file. Some comments from this file: /* avr/iom64c1.h -...
Wednesday, 16 January 2013 - 03:30
Avr mega64C1
Rather than struggle with that library code, I took apart a much larger program and pasted it together with some new code. I do not have any working CAN nodes on my bench at this...
Tuesday, 15 January 2013 - 02:51
Avr mega64C1
Oops. I do not know this code and have never looked at it before. I made a mistake. You should use CMD_RX_DATA_MASKED and not use CMD_RX_DATA. It appears CMD_RX_DATA is a special...
Sunday, 13 January 2013 - 02:42
Avr mega64C1
This was from the first version of the code you posted on www.2shared. They are located in the lib.h, lib.c source and setup in the main.c source (they are also in your new www....
Sunday, 13 January 2013 - 00:09

Pages