Post Created date
Output Pin to 5V
Yes, what if one uC is trying to drive the line high while another is trying to drive the line low? This is called bus contention and leads to high power draw and possibly a dead...
Thursday, 25 December 2008 - 08:26
Help interfacing a multiplex VFD display
Fantastic! I got my VFD working tonight. Now I just need to verify that the USI on the ATtiny is working and I will be done! Well, then it is time to make a PCB for the VFD...
Monday, 1 December 2008 - 06:44
Tiny-FatFs AVR example source code usage
There are also timeouts that use one of the timers. If you're already using it then you have some work (not much) ahead of you!
Monday, 10 November 2008 - 13:08
Semiconductor timing reference?
Jepael wrote:The point was that in any case the internal oscillators are currently way inaccurate for serial communications with current technology they use. The crystal...
Sunday, 9 November 2008 - 18:40
Semiconductor timing reference?
I don't see what all the hubub about these magic frequencies are. I haven't had any problems with my UARTs while running them up to 115.2 kbps with my "unclean" clocks like 8, 12...
Sunday, 9 November 2008 - 07:54
wear out AVRs?
I'll worry about bugs in my code long before I will ever worry about flash/EEPROM endurances and MTBFs!
Tuesday, 4 November 2008 - 05:10
Is there need for a comprehensive RC servo tutorial?
Yes, I would love such a tutorial!
Tuesday, 28 October 2008 - 01:08
including data with program in FLASH
clawson wrote:Quote:Won't you run into problem because your image data is where the interrupt vectors are? Only if the program includes an sei() Do you also mask the RESET vector...
Monday, 20 October 2008 - 14:36
including data with program in FLASH
Won't you run into problem because your image data is where the interrupt vectors are? That is, unless you've placed the vectors in the bootloader space.
Monday, 20 October 2008 - 13:40
How to monitor a PC's USB line without the PC alerting?
I think you need to reevaluate your problem and look for solutions that work at a much higher level. -Jevin
Monday, 20 October 2008 - 00:07
"Low level"/"level" INT0 Power Down
mtaschl wrote:But PD2 can also fire PCINT18 and this will work in power-down-mode. It will fire at any edge, so you have to check the level by software after wakeup.Good point!...
Wednesday, 15 October 2008 - 06:26
"Low level"/"level" INT0 Power Down
You can't wake from power down on an edge, the edge detection needs a clock to work. The only way you can use external interrupts in power down mode is by using a low level...
Wednesday, 15 October 2008 - 03:18

Pages