Type in the full discussion title or a part of it.
Discussion Title Created date
Splitting EEPROM into two sections + AVR Studio 4
Hi All, I am struggling a bit with creating two EEPROM sections. Firstly, I would like to do this so that there is a set structure at the start of EEPROM on every device I program...
Friday, 28 October 2005 - 14:20
MEGA128 and UBRR0 register
Hi All, Is there any reason that UBRR0, UBRR1 and UBRR0L are not defined in the io include file? Are they due to be added already, or else where should I post about the missing...
Monday, 10 October 2005 - 11:08
USB level translation
Hi all, I have an ATTINY2313-20SI running at 12MHz, and configured to run the IGOR firmware USB stack. I have a maxim bi-directional level translator on board so that I can run...
Wednesday, 21 September 2005 - 09:46
Loop optimisation
Hi All, Is there a preprocessor directive to turn off optimisation during certain portions of the code? For example, the following seems to optimise out my io line delay loop... (...
Monday, 12 September 2005 - 09:42
bosch 60-2 decoding
Hi There, Has anyone got an AVR to sync up with a 60-2 bosch crank angle sensor? I'm currently writing some code at the moment to do this, and just wondered if anyone else had...
Thursday, 15 May 2003 - 14:59
Temporary Flash page
Still battling on with why my SPM routine does not work properly. Found that I sub'd a word count which should have been a byte count though. Now instead of the erased page, I get...
Tuesday, 13 May 2003 - 12:23
SPM simulation
Hi there, has anyone had the problem of AVR studio executing the SPM command and giving different results compared to a device running the same code? My program simulates fine...
Monday, 12 May 2003 - 14:08
SPM modifying flash
Hi there, OK, so I've got some code done now for modifying flash from a SRAM variable. The SRAM variable is a 128 byte array, the size of a page in the ATMEGA16, which I am using...
Friday, 9 May 2003 - 13:16
Flash variables
Hi guy's I'm after some more variable space, for a few arrays of say 50 bytes. I've no SRAM left, and the design is such that I can no longer use an external piece of memory. The...
Tuesday, 6 May 2003 - 15:45
ATMEGA16 ADC simulation in Studio3.55
Hi there, I'm simulating some code for an ATMEGA16, and in studio 3.55, if I cause the ADC_INT interrupt, nothing happens, apart from the interrupt flag is cleared on the next...
Thursday, 9 January 2003 - 21:48
ATMEGA16 Simulation
Hi, I am using Codevision AVR-C, and AVR Studio 4.05 When I load the COF file into AVR Studio to start a project, I select the ATMEGA16 device from the list. However, once the...
Wednesday, 16 October 2002 - 12:16
AVR ISP ATMEGA16 programming...
Hi there, Has anyone done a device definition for the ATMEGA 16 in the ini file of AVR ISP? I thought I'd ask before I write it ;) If so, could you paste up the text for me?...
Thursday, 18 July 2002 - 15:27

Pages