Post Created date
how to add own programmer into avrdude?
hi clawson, Quote:Why is any of this important to you anyway? For most people it's just a case of matching the -c option to the programmer actually being used - how it actually...
Thursday, 15 October 2009 - 10:00
how to add own programmer into avrdude?
hi, thanks for the reply.It is interesting after i refer to the conf file. As what i have read from the conf file.it stated the entry format for a new programmer.But why some of...
Thursday, 15 October 2009 - 09:39
Is it load stack is a must when using subroutine?
js wrote:Quote:ATmega32L should be not included in older AVR list.Or is it? Yep,pretty old in micro years. :) Use a Mega324p. hi js, thanks for this info.After comparing the price...
Wednesday, 14 October 2009 - 03:55
Is it load stack is a must when using subroutine?
hi, thanks for the reply again. .include "m32def.inc" .def temp= r19 rjmp start start: ldi R16,low(RAMEND) out SPL,R16 ldi R16,high(RAMEND) out SPH,R16 ldi temp,0xff...
Wednesday, 14 October 2009 - 03:54
Is it load stack is a must when using subroutine?
hi js, but if i wrote the blinking code in C.i wont have to worry about this steps.it will work without take care of the load stack part.Any idea what happen in C? thank you.
Wednesday, 14 October 2009 - 03:41
Is it load stack is a must when using subroutine?
hi js, thanks for the reply.I'm using ATmega32L for my testing.As what i know, ATmega32L should be not included in older AVR list.Or is it? because when i quote the four...
Wednesday, 14 October 2009 - 03:25
Can a USB device without VID and PID be used?
hi, Thanks for the replies. As what i have checked from LUFA library.It mentioned that VID 0x03EB and PID 0x2040 are for test application.Is it means that, i can use this PID and...
Thursday, 8 October 2009 - 02:11
can external reset circuit connected with ISP programmer?
Quote:Your external reset circuit must not be push-pull, it needs to be open-drain, eventually with pull-up-resistor. sorry.i not really understand how is your circuit looks like....
Thursday, 23 July 2009 - 07:27
can external reset circuit connected with ISP programmer?
From the application note i read from ATMEL.it says that, the reset line has to be kept at active low in order to enter and stay in programming mode. So if i connect an external...
Thursday, 23 July 2009 - 03:57
can external reset circuit connected with ISP programmer?
haker_fox wrote:Your ISP programmer will work finely until you press the "reset" button. so do u mean that, even though there are two different voltage parallel going in to the...
Thursday, 23 July 2009 - 03:39
SinaProg 1.3.5.6 - GUI for AVRDUDE with AVR Fuse Calculator
thanks.nice gui with avrdude.
Thursday, 2 July 2009 - 05:08
Usb device does not recognize!!!!!!!at90usb162....
have u program the configuration bits properly? As what i'm facing before this "USB device not recognize", i tried to reprogrammed my IC with different configurations bits then it...
Tuesday, 30 June 2009 - 04:00

Pages