Type in the full discussion title or a part of it.
Discussion Title Created date
how to add own programmer into avrdude?
hi all, So far i'm just using others people programmer to write my code into my AVR.Both of the programmer i'm using they are program through avrdude. Some question just come out...
Thursday, 15 October 2009 - 08:35
Is it load stack is a must when using subroutine?
hi all. My asm code just to blink the leds. For my first code, i didnt add in the load stack step which is as follow: ldi R16,low(RAMEND) out SPL,R16 ldi R16,high(RAMEND)...
Wednesday, 14 October 2009 - 02:41
Can a USB device without VID and PID be used?
hi all, From what i have read and search from the net, i found that all the USB device have their own PID and VID. So i'm wondering can a USB device without a PID and VID work?Or...
Wednesday, 7 October 2009 - 05:28
can external reset circuit connected with ISP programmer?
hi all, i have a doubt about the reset part for my project. I'm using an ISP interface programmer to program my ATMEGA32L. So i connected the MOSI, RST, SCK, and MISO pin from the...
Thursday, 23 July 2009 - 02:16
if..else statement error
hi all, what is the problem with my coding? when i simulate it using avrstudio, i found that the simulator keep looping within the ifelse statement and wont go to test the PORTC...
Thursday, 18 June 2009 - 02:52
Does jtag able to debug single stepping on timer program?
hi all, Does jtag able to do single stepping on program such as control servo using timer? When i start to debug using avr studio using single stepping the servo seems like...
Monday, 15 June 2009 - 03:16
problem: program keep running in the ISR
hi all, When i try to simulate my code using AVR studio, i found that after the first time the program enter the ISR, instruction will go lost. The result from my PORTA just keep...
Wednesday, 13 May 2009 - 09:28
does ATMEGA32L able to control 5 servo in one time?
hi all, since from the datasheet it shows atmega32L support until 4 PWM channel. So am i able to control until 5 servo in one time? thanks.
Wednesday, 13 May 2009 - 02:07
incorrect 2nd data from usart.
hi all, i'm facing problem in getting incorrect data from my usart. my pc is sending one hex value and one dec value when i press a button. To check is it the correct data has...
Tuesday, 12 May 2009 - 06:10
question to store data from USART to an array.
:?: hi all, i'm now working on USART with my ATMEGA32L. For now i have a VB program and when i click the button it will send a few data such as my servo position and my timer...
Tuesday, 12 May 2009 - 01:17
how to erase all the fuse bit back to the origin?
:?: hi all, i'm facing a serious problem which is once i wrote in the configuration and security bit of my atmega32L, atmega16L and atmega8535 IC.i found that my ic cannot be...
Friday, 8 May 2009 - 06:12
doubt about system clock speed for atmega32L.
:?: hi all, i have a doubt about the system clock speed for atmega 32L which mention in some of the tutorial or discussion. i'm using atmega32L for my learning. so i add in a 4Mhz...
Tuesday, 5 May 2009 - 03:05