Post Created date
AVR Dragon (+ Rider) Frustrations
Actually, looking at some of the past posts, I'm pretty afraid to EVER use debugWire: Do you guys still...
Friday, 17 June 2011 - 14:10
AVR Dragon (+ Rider) Frustrations
Thank you everyone. Good to know the problem. I'll take extreme care if using debugWire in the future. As for those 3 chips I wrecked. Would high voltage programming get them...
Friday, 17 June 2011 - 11:52
AVR Dragon (+ Rider) Frustrations
Thanks for the advice. I downgraded to AVR Studio 4 and retried. I had no luck with the two ATTiny13's I had available. And I had no luck with the one ATTiny2313 I own. So I moved...
Friday, 17 June 2011 - 04:21
Light "Signal Processing" on an AVR - (RF Signals)
Thanks for all the options! I'll look into those to find something suitable for playing around.
Thursday, 29 January 2009 - 13:51
[TUT][SOFT] The traps when using interrupts
Great tutorial Kartman. Quick question: Under Atomicity, you mention interrupts should be disabled then re-enabled after modifying shared variables. Later it says to use volatile...
Thursday, 18 September 2008 - 13:32
Send/Receive Packets with USART?
Thanks all! I like the idea of the finite state machine. Didn't think about the fact that only one branch is executed. For sending multiple bytes, is it easiest to write a...
Thursday, 18 September 2008 - 13:22
Problems on first connect w/ Dragon Rider 500 [SOLVED]
Found the problem. It turns out that there is a footprint on the Dragon Rider 500 for a LM1117 regulator next to where it takes in the AVR Dragon source voltage. If not using a...
Friday, 1 August 2008 - 05:32
Problems on first connect w/ Dragon Rider 500 [SOLVED]
Can't seem to narrow this one down even after checking the pins, etc. Is this a symptom for a malfunctioning Dragon? (Hmm.. wonder if Digikey has a return policy)
Friday, 1 August 2008 - 02:27