Type in the full discussion title or a part of it.
Discussion Title Created date
XMega ADC - 2 MSPS Capable?
Hello all, According to Atmel tech support, the XMega 128 A1's ADCs *can't* sample at the full 2 MSPS. They reportedly sample at a max of 500 KSPS. I couldn't find this in the...
Tuesday, 6 July 2010 - 16:59
XMega - 128A1 With AVR Studio
Hello all, I've been looking into taking a raw XMega 128A1 chip and setting it up to run a simple LED blinker program. The problem is that I haven't been able to find a good...
Thursday, 24 December 2009 - 22:41
Xmega - Fully supported by GCC?
Hello all, I was thinking of purchasing an XMega 128. However, I wasn't sure if winAVR/AVR studio had full support for the devices yet. Also, I was hoping the errata would be...
Sunday, 2 August 2009 - 04:53
ATMEGA 168 - Clocking Limit (Frequency) Questions
Hello all, I have been working with the Atmega 186 processor. At the present time, I have been using it with 5V, which allows for a 16Mhz clock. However, I would like to...
Thursday, 8 January 2009 - 03:37
USART Data stream Managment
Hi all, I have been able to get my UART working fantastically for simple data streams such as having the uC echo GPS data strings to the computer. Now, I want to have the...
Sunday, 19 October 2008 - 02:50
Starting Out - How to get started with AVR 32
Hi all, I have been using the AVR 8 bit line for some time now. I am interested in the 32 bit line, but would like to ask some questions before I start. First, from...
Sunday, 12 October 2008 - 22:56
High Impedance (High Z)
Hi, I was wondering, is there a way to test to see if you have set a pin to its tri-state high impedance state? I'm not sure how I could do a physical test to make sure the...
Tuesday, 19 August 2008 - 23:10
Questions about SIGNAL vs. ISR
Hi all, I was wondering about the difference between ISR and SIGNAL. I saw an earlier post, but it seemed as if the responses had been removed. Clawson had said something...
Sunday, 10 August 2008 - 22:02
UART Math - How do you tell if its not your code's problem?
Hi everyone, I am about to ask a UART question. This is more of the math, and acceptable error kind of question. Background: - Device ATMega 128 - Complier AVR Studio - Fuse...
Saturday, 9 August 2008 - 18:52
Dynamic Linked Libraries (DLL) - Is this possible?
Hi, I was wondering if AVR Studio had the ability to support DLLs. I have written a fairly extensive set of C code, and want to make it available with my AVR projects. I...
Friday, 1 August 2008 - 06:05
Atmel 16 and 164P/324P/644P with Eagle CAD
Hi All, I was wondering if anyone had used the 164P or 16 in an Eagle design? I would like to use the PDIP 40 pin package. Technically, the 16 should be the same in terms of...
Friday, 1 August 2008 - 06:00